型号: | S227、S331 |
---|---|
品牌: | 胜鑫 |
原产地: | 中国 |
类别: | 工业设备 / 通用机械 / 焊接设备与材料 |
标签︰ | 焊条 , 焊丝 , 锤头 |
单价: |
¥1
/ 件
|
最少订量: | 1 件 |
型号 | S227铜锌焊丝 | 类型 | 实芯 |
品牌 | 胜鑫 | 助焊剂含量 | 6(%) |
标准直径 | 1.0-5.0(mm) | 熔点 | 935(℃) |
重量 | 5(g) | 用途 | 熔点约935℃。高强度,钎焊钢、镍及硬质合金用 |
材质 | S227铜锌焊丝 | 产地 | 河北 |
长度 | 400 | 工作温度 | 930 |
规格 | 1.0-5.0 | 焊接电流 | 930 |
牌号 | S227铜锌焊丝 | 是否含助焊剂 | 是 |
Category 类 别 |
Trade
牌 号 |
Chemical composition 主要成份(%) |
Characteristics & application 特性和用途 |
Equivalent to AWS 相当AWS |
Hardfacing 硬 面 堆 焊 |
S101耐磨焊丝 |
C3 Cr28 Ni4
|
HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.
|
|
S111钴基焊丝 |
C1 Cr29 W5
|
HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.
|
ECoCr-A |
|
S112钴基焊丝 |
C1.5 Cr29 W8
|
HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.
|
ECoCr-B |
|
S113钴基焊丝 |
C2.5 Cr30 W17
|
HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.
|
|
|
S114钴基焊丝 |
C2.5 Cr30 W12
|
HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.
|
ECoCr-C |
|
Copper alloys
铜
合
金 |
S201铜合金焊丝 |
Sn1 Si0.3Mn0.3
|
Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
|
ERCu |
S211铜合金焊丝 |
Si3 Mn1
|
Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
|
ERCuSi-Al |
|
S212铜耐磨焊丝 |
Sn5 Cu Rem. |
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
|
ERCuSn-A |
|
S213铜耐磨焊丝 |
Sn8 Cu Rem. |
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
|
ERCuSn-C |
|
S214铜耐磨焊丝 |
Al7.5 Cu Rem. |
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
|
ERCuAl-A1 |
|
S215铜耐磨焊丝 |
Al9 Cu Rem. |
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
|
ERCuAl-A2 |
|
S221铜合金焊丝 |
Cu60 Sn1 Si0.3
|
Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
|
|
|
S221F铜合金焊丝 |
Cu60 Sn1 Si 0.3
|
S221 welding rod coated with flux.
|
|
|
S222铜合金焊丝 |
Cu58Sn0.9Si0.1
|
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
|
RBCuZn-C |
|
S222F铜合金焊丝 |
Cu58Sn0.9Si0.1
|
S222 welding rod coated with flux.
|
RBCuZn-C |
|
S223铜合金焊丝 |
Cu59 Sn0.6
|
Melting point is about 900℃. Braze welding of copper, steel and cast iron.
|
RBCuZn-A |
|
S224铜锌焊丝 |
Cu62 Si0.5
|
Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
|
|
|
Copper
铜 合 金 |
S225铜锌焊丝 |
Cu48 Ni10
|
Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys.
|
RBCuZn-D |
S225F铜锌焊丝 |
Cu48 Ni10
|
S225 welding rod coated with flux.
|
RBCuZn-D |
|
S226铜锌焊丝 |
Cu60 Sn0.3
|
Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.
|
|
|
S227铜锌焊丝 |
Cu58Sn0.9Ni0.5
|
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
|
RBCuZn-B |
|
S229铜锌焊丝 |
Cu55 Ni6 Mn4
|
Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.
|
|
|
Aluminum alloys 铝 合 金 |
S301纯铝焊丝 |
Al≥99.5 |
Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
|
ER1100 |
S311铝镁焊丝 |
Si5 Al Rem. |
Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
|
ER4043 |
|
S321铝焊丝 |
Mn1.3 Al Rem. |
Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
|
|
|
S331铝焊丝 |
Mg5 Mn0.4
|
Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
|
ER5183< |
河北胜鑫(铸造)焊接集团有限公司 | |
---|---|
国家/地区︰ | 河北省邢台市 |
经营性质︰ | 生产商 |
联系电话︰ | 18733947241 |
联系人︰ | 赵江涛 (经理) |
最后上线︰ | 2014/03/06 |