此款特色：工作電流增加，因為繼電器電流增大到30A，此款可以與2.2KW水泵配套使用，在缺水狀態下，PCB板有自動水源檢測功能，缺水后第1次到第3次每次檢測時間為3分鐘，水泵工作20秒，每次第4次到第14次每次檢測時間為30分鐘，水泵工作20秒，第15次到第58次每次檢測時間為1小時，水泵工作20秒，整個檢測過程長達48小時。當檢測到有足夠水源后，水泵會進入正常工作狀態。

額定電壓：220-240V  110-115V       
頻率：50/60Hz            
最大電流：30A
保護等級：IP65
起始壓力：1.5bar、2.2bar

Fuction:

1.Start and stop the pump automatically

2.Protect the pump from damage caused by dry-running

3.Examine the water automatically

State LED:

1.Red led(state one)lights up:the unit is off

2.Green led(state two)lights up:the pump stops

3.Red led(state one)and green led (state two)flash alternately

    in slow speed:pump in operation

4.Red led(state one)and green led(state two)flash alternately

    in high speed:pump stops:waiting to start

5.Press the ON/OFF button for one second to start the unit:

    press the ON/OFF button for five seconds to stop the unit

Description for the eaxm process:

     While the pump is in the absence of the water;it will start the first exam after 3 mins.it will last 50 seconds;Then the unit will examine in the following second to twelfth time in every 30 mins.and exam time will last 50 seconds;And the unit will examine in the following thirteenth fo forty-seventh time in every 60 mins.exam time will last 50 seconds;The unit will stop in the forty-eighth exam.During the exam process,it lasts 41 hours.

Technical parmeters:

Rated voltage:220-240V、110-150V

Frequency:50/60Hz

Max.current:10(6)A

Protection grade:IP65

Starting pressure setting:1.0bar or 2.2bar