Contact type
NC - normally closed - ( P06, H06 )
NO - normally opened - ( P08, H08 )
Nominal switching temperature (NST) 70 °C – 180 °C in steps of 5 K , other values on request
Standard tolerance ±5 K
Resetting temperature (RST) Standard:
UL:
UL:
NST 70 °C – 180 °C: >35 °C
NST 70 °C – 95 °C: RST = 35 °C / 65 °C
NST 100 °C – 180 °C: RST = NST -50K ± 15K
Operating voltage ..AC /...DC Up to 500 V~ / 12 to 100V=
Rated voltage AC (at 50Hz – 60Hz) 250 V AC (VDE,IEC,CSA) 277 V AC (UL)
Rated current AC INOM 10.0 A cos φ = 1.0; 6.3 A cos φ = 0.6 10,000 switching cycles
Max. switching current at 250 V~ 25 A 2,000 switching cycles
Contact bounce time < 1 ms
Impregnation resistance suitable (acc. to Thermik-Test)
Contact resistance < 50 mW with reference to MIL–STD. R 5757
Vibrations proof at 10 ..... 60 Hz 100 m/s²
Pressure stability of housing 600 N (max. to Thermik- Test)
Switch insulation in Ryton® - housing ®: Trade-mark Phillips Petroleum international
Max. turning moment 3 NM
High voltage insulation 2 kV life parts to ground. excepted not insulated pins
P06 / P08 Pins / Soldering tags. 0.9 x 0.6 mm . distance between the pins 5.08 mm
Connections
H06 / H08
Multi strand wire: 0.75 mm² ; length: standard 100 mm (300 mm).
Insulation class adapted to NST. Special approved connection
leads for UL/CSA - versions. Please mention when ordering.
Approvals acc. to design for
VDE with reference to EN 60730-1; EN 60730-2-9 (VDE 0631)
CB *) with reference to IEC 60730-1; IEC 60730-2-9
UL with reference to UL 2111; UL 873
CSA with reference to C22.2