型號: | - |
---|---|
品牌: | 斯米克電焊條 |
原產地: | 中國 |
類別: | 工業設備 / 通用機械 / 焊接設備與材料 |
標籤︰ | 斯米克電焊條 , 焊條 , 焊接材料 |
單價: |
-
|
最少訂量: | 10 公斤 |
Category
類 別 |
Trade-
Mark 牌 號 |
Equivalent to China Standard
相當國標 |
Characteristics & application
特性和用途 |
Equivalent to AWS
相當AWS |
Hard-surfacing 硬 面 堆 焊 |
D 667
|
EDZCr-B-15
|
HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
HRc≥48,耐磨、耐氣蝕、抗氧化。堆焊高爐料鐘、破碎機件 |
|
D 802
|
EDCoCr-A-03
|
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
HRc38-47,耐熱、耐蝕、耐磨。堆焊高溫工件如熱剪切刀刃 |
ECoCr-A
|
|
D 812
|
EDCoCr-B-03
|
HR5-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
HR5-50,耐熱、耐蝕、耐磨。堆焊高溫工件如內燃機閥 |
ECoCr-B
|
|
D 822
|
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
HRc≥53,耐熱、耐磨,但抗衝擊性差。堆焊鍋爐旋轉葉輪 |
|||
D 832
|
EDCoCr-C-03
|
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
HRc≥50,耐熱、耐磨。堆焊高溫工件如熱軋導軌 |
ECoCr-C
|
|
D 842
|
EDCoCr-D-03
|
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
HRc28-38,耐蝕、抗熱疲勞,具有加工硬化性。堆焊熱鍛模 |
||
Cast iron 鑄 鐵 |
Z 308
|
EZNi
|
Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
純鎳,綜合性能好。鑄鐵薄件及加工面補焊用,如機床導衛 |
ENi-Cl
|
Z 408
|
EZNiFe
|
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
鎳鐵,強度高、塑性好。重要灰鑄鐵及球鐵焊補用,如汽缸蓋 |
ENiFe-Cl
|
|
Z 508
|
EZNiCu-1
|
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
鎳銅,易加工,但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊 |
ENiCu-B
|
|
Copper alloys 銅 合 金 |
Cu 107
|
ECu
|
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫銅,耐大氣,海水腐蝕,導電性好。紫銅焊接用,如導電銅排 |
ECu
|
Cu 207
|
ECuSi
|
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青銅,耐蝕、強度高。銅、硅青銅及黃銅焊接用 |
ECuSi
|
|
Cu 227
|
ECuSnB
|
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
錫磷青銅,耐蝕、強度高。銅、硅青銅及黃銅焊接用 |
ECuSn-C
|
|
Cu 237
|
ECuAl
|
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
鋁青銅,耐磨、耐蝕,強度高。銅合金焊接或堆焊用 |
ECuAl-A2
|
|
Aluminum alloys 鋁 合 金 |
Al 109
|
TAl
|
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
純鋁,耐蝕性好,但強度不高,純鋁焊接用 |
E1100
|
Al 209
|
TAlSi
|
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
鋁硅,抗裂性好,通用性大。鋁合金焊接用,不宜焊接鋁鎂合金 |
E4043
|
|
Al 309
|
TAMn
|
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
鋁錳,強度高,耐蝕。鋁合金焊接用 |
E3003
|
|
Nickel alloys 鎳合金 |
Ni 102
|
ENi-1
|
Pure nickel. Welding and surfacing of nickel and nickel to steel.
純鎳,用於鎳、鎳與鋼的焊接與堆焊 |
ENi-1
|
Ni 207
|
ENiCu-7
|
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
鎳銅,用於鎳銅、鎳銅與鋼的焊接與堆焊 |
ENiCu-7
|
南宮市明宇合金焊條廠 | |
---|---|
國家/地區︰ | 河北省邢台市 |
經營性質︰ | 貿易商 |
聯繫電話︰ | 15194937759 |
聯繫人︰ | 焦月輝 (經理) |
最後上線︰ | 2014/06/01 |