型號: | DEPOSITRON 820 |
---|---|
品牌: | SANWA 三和 |
原產地: | 日本 |
類別: | 工業設備 / 其他工業設備 |
標籤︰ | 被覆機 , 表面處理 , 模具硬度 |
單價: |
¥30000
/ 件
|
最少訂量: | 1 件 |
大功率被覆裝置
此型號為功率最大的被覆裝置。可迅速的在物體表面形成厚 的被覆層。經長時間使用且嚴重磨損的模具,刀具,工具及 其機械設備,可用此設備進行表面被覆處理。從而延長其服 務壽命。 |
特點、應用如下所示Depositron 720/820可迅速快捷的的將硬金屬如碳化鎢被覆在所有模具、刀具及機械設備的磨損部位,經被覆
處理的部件硬度可提高至HV1100。Depositron 720為普通機型,用於少量操作;Depositron 820為大功率機型,用於大 量操作。 ●防止沖壓模毛邊 對沖壓模(如SK,SKD,SKH)的下半模內層進行被覆處理,可防止毛邊出現,經過處理后的模具母材不會收到任何影響。●金屬模具易磨損部位 此設備可針對壓鑄模易遭侵蝕或熱龜裂部位進行被覆處理,可使熔損降至最低,並提高成品離型性,預防熱龜裂及毛邊, 也可對已遭侵蝕龜裂的壓鑄模進行被覆處理,抑制模具繼續惡化能繼續生產,增加模具的使用壽命。除了壓鑄模之外, 此設備亦可用於塑料模,煅模及玻璃模具的被覆處理。 ●鑽頭、銑刀、絲錐及所有刀具 此設備可對鑽頭、銑刀、絲錐、絞刀等刀具預先進行被覆處理,可防止道具快速磨損;也可對已磨損的刀具作被覆處理, 以補正精度繼續使用。經被覆處理的刀鋒不會變鈍。 ●機器設備的磨損部位 此被覆裝置可用於所有機器設備磨損部位的被覆處理,以增加使用壽命。例如紡織機械零件、包裝機械、印刷機械、 制革機械凸輪、羅拉等都可進行被覆處理。 |
![]() |
什麼是放電被覆裝置
SANWA SHOKO放電被覆裝置Depositron 720/820是為商業需求應運 而生的放電被覆裝置。操作原理是利用空氣產生間歇性火花放電 從而使碳化鎢電極材料溶化在被加工金屬表面形成被覆層。經碳 化鎢被覆處理的金屬表面硬度可達HV1100,耐壓力、耐腐蝕,空 氣的逸出性及離型性提高。可防止模具的熔損、熱龜裂、毛邊及 壓鑄件咬模等。因此此設備可以稱為是具有劃時代意 義的表面處理設備。 |
![]() ![]() |
放電被覆裝置Depositron 720/820的特征
在操作過程中火花放電所產生的極高溫度使碳化鎢電極熔化與工作面緊密地粘附在一起,從而在工作面上形成一層碳化 鎢被覆層。被覆層的厚度及粗糙度由設備的加工程度來確定,此項目是可調節選擇的。但是基於電極材料為硬金屬碳化 鎢,其加工厚度一般為0.01至0.03mm,粗糙度在4至15微米之間。 |
技術參數
|
規格
|
Depositron 720
|
Depositron820
|
|
輸入功率 | AC100V,110V,200V, 210V, 220V, 230V,
240V, 50 / 60Hz, |
AC100V,110V,200V, 210V, 220V, 230V,
240V, 50 / 60Hz, |
|
功率電容 | 63VA | 155VA | |
振盪方法 | 電流同步驅動型 | 電流同步驅動型 | |
開關選擇 | 電源箱 | 3階轉換 | 5階轉換 |
手柄 | ------ | 3階轉換 | |
被覆速度 | 30到50秒/平方釐米 | 20到40秒/平方釐米 | |
被覆厚度 | 0.01到0.02mm | 0.01到0.03mm | |
尺寸(W*D*H)mm | 375 ×220 ×170 | 270 ×330 ×165 | |
重量 | 電源箱 | 約8.5kg | 約12kg |
手柄 | 約0.3kg | 約0.3kg |
![]() |
![]() |
Extends the service life of molds and tools.The discharge deposition equipment is used to form a coating layer on hard metal, etc., thus improving the service life of any type of mold or cutware. Processing can be done within a short period of time, dramatically extending the service life of molds and tools. | |
![]() |
Enabling discharge deposition with higher output.This is the most powerful type of discharge deposition equipment. Thicker coating layers can be processed quickly, while significantly increasing service life by protecting the portions of molds, cutware, and machines that experience the greatest wear. | ||
Features,ApplicationsAs shown below, Depositron 720/820 can deposit hard metal such as tungsten carbide quickly and simply to all kinds of dies and cutters, machine parts , etc. to improve surface hardness up to HV1100. The 720 Model isfor general use, while the 820 Model is for heavy duty applications. |
![]() |
Concerning Discharge Deposition Equipment
|
●The SANWA SHOKO Discharge Depo-
sition Equipment , Depositron 720, is a commercial application of the principle of discharge deposition, a process in which an intermittent spark discharge in the air causes electrode material to be deposited in diffused layers on the metal sur- face of the work. Beginning with the wear resistant layers from tungsten carbide electrodes (HV1100), a variety of coatings can be applied easily to provide resistance to heat, corrosion, etc. With a wide range of applications, this is truly an unparalleled epoch-making product. What is Discharge Deposition Equipment |
![]() ![]() |
|
●Concerning the Nature of Discharge Deposition EquipmentAn unusual high temperature is generated locally by the spark discharge and the electrode deposits a dispersed coating which adheres intimately to the surface of the work. Because of its dispersed nature, the deposited layer is bonded strongly and will not peel off. The thickness and roughness of the deposited layer depends on the process level of the equipment, which can be selected, but in the case of hard metal, thickness ranges from 0.01 to 0.03 mm and harness from 4 to 15 μHmax. If necessary, the coating can lightly lapped before use. |
Specifications
|
Specifications | DEPOSITRON720 | DEPOSITRON820 | ||
Input power |
AC100V,110V,200V, 210V, 220V, 230V,
240V, 50 / 60Hz, |
AC100V,110V,200V, 210V, 220V, 230V,
|
||
Power Capacity | 63VA | 155VA | ||
Process Vibrator | Electric synchronised
drive type |
Electric synchronised
drive type |
||
Process
Selection Switch |
discharge power
|
3-stage switched | 5-stage switched | |
vibrator power
|
- | 3-stage switched | ||
Deposition Speed | 30 to 50 sec/cm2 | 20 to 40 sec/cm2 | ||
Deposition Thickness | 0.01-0.02mm
(Hard metal) |
0.01-0.03mm
(Hard metal) |
||
Dimensions
(W×D×H)mm |
375 ×220 ×170 | 270 ×330 ×165 | ||
Weight |
Power unit
|
approx. 8.5kg | approx. 12kg | |
Vibrator
|
approx. 0.3kg | approx. 0.3kg |
貨品編碼 | 貨品名稱 | 型號 | 品牌 | 產地 | 用途 |
BFSB0000 | 被覆機 | 820 | DEPOSITRON | 日本 | 硬度處理 |
BFSB0001 | 被覆機 | 720 | DEPOSITRON | 日本 | 硬度處理 |
上海金煒五金機械有限公司 | |
---|---|
國家/地區︰ | 江苏省无锡市 |
經營性質︰ | 貿易商 |
聯繫電話︰ | 15861401656 |
聯繫人︰ | 蔡小姐 (銷售) |
最後上線︰ | 2015/08/18 |