• 參數規格說明：

      工作電壓：直流DC12V±20%

  工作電流：（1）靜態：40mA

          (2) 動態:300mA

  工作溫度：-10～75℃

      適用硬幣：直徑15mm～29mm；

          厚度1.2mm～3.5mm

        適用於世界各國的各種硬幣、代幣

 

• 設定使用說明  （位置參見簡圖標識

第一步：按一下設定鍵⑤，⑦三個指示燈同時慢閃；再按一下設定鍵⑤，

此時正中間的第一個指示（A）燈⑦閃爍，投入第一種幣30  枚新舊版（菲律賓幣1元）

第二步：再次按設定鍵⑤，第二指示(B)燈⑦閃爍，投入第二種幣   30枚新舊版（菲律賓幣5元）。

第三步：再次按設定鍵⑤，第三指示（C）燈⑦閃爍，投入第三種幣   30枚新舊版（菲律賓幣10元），投完就是設定完成！（使用新舊版本及不同年份為佳）。

 

 

 

 

 

 

 

Manual of Coin Selector Model HS-623

 

1. Reference specifications：

      Power supply：DC12V±20%

  Working current：（1）Static：40mA

          (2) Dynamic:300mA

  Working temperature：-10～75℃

      Applicable Coins：Diameter 15mm～29mm；

          Thickness 1.2mm～3.5mm

        Suitable for all countries’ coins

 & tokens

          

2. Set instructions（Position seediagram logo）:

First,Press SET button ⑤ and the three LED lights ⑦ flash slowly. Press the SET button ⑤again and only the first LED light still flashes slowly. Now insert 30 coins of the first coin value (The Philippines currency 1 coin).

 

Second,After the setting of the first coin value is completed, the first LED light will flash quickly. Press the SET button⑤, then the first LED light keeps lighting and the second LED light flashes slowly. Now insert 30 coins of the second coin value (The Philippines currency 5 coin).

 

Third,After the setting of the second coin value is completed, the first LED light will keep lighting and the second LED light will flash quickly. Press the SET button⑤, then the first two LED lights keeps lighting and the third LED light flashes slowly. Now insert 30 coins of the third coin value (The Philippines currency 10 coin). After the setting of the third coin value is completed, the three LED lights will flash quickly at the same time for three seconds. Now the coin selector can work normally.(Note:All coins use new and old version sample with different years)