Inner and outer Ring of SWG

HEROOS-600 Ralso can be processed for inner and outer ring of spiral wound gasket. We make the inner and outer ring by punched for size small then 14 inch, and by lathe for large sizes. If some material is costly, for example SS304, SS316 etc., we can make it by bending and welding with low cost, if the seal face is narrow

HEROOS-600R  is machined from solid metal sheet in a round shapes and designed for high pressure, high temperature or highly corrosive applications by selecting the most suitable material. It is designed to withstand exceptionally high assembly loads over a small area.

HEROOS-600R also can be processed for inner and outer ring of spiral wound gasket.

HEROOS have enough homemade special groover and angling machines for making inner and outer rings of SWG with good efficiency and lower cost.

AVAILABLE:

Size:

ASME B 16.20

1/2” to 24”

150LB, 300LB, 600LB

Other Sizes or standard on request

Materials:

Carbon Steel, with or without zinc coating

SS304, SS304L, SS316, SS316L

Other special materials:

SS321, SS317L, Duplex 31803,

Ti, Ni, Inc, Hast. Monel, Zr. etc

ORDERING EXAMPLE:

Inner and outer ring , Material: SS304

2” 150LB