1 Features
This machine is mainly use pasteurized for beer, ketchup and other products sterilization and cooling, but also as a separate cooling equipment. The machine uses hot water circulation spray sterilization, warm water pre-cooling, cold water cooling and other multi-stage approach, the sterilization temperature and time adjustable, high degree of automation. The machine consists out of the tank belt mechanism, running belt systems, racks, sprinkler system, water pump tanks, steam heating automatic control system and main transmission electronic control box.
2, the principle of the device
Require sterilization tank by real input into the tank to a large network of conveyor belt, with input from the network to the sterilization area for spray cans were sterilized. Sterilization using steam-heated hot water spray sterilization, the maximum temperature of 92 ℃, sterilization temperature can be arbitrarily set automatic temperature control device, as long as the settings on a set limit and lower limit in parameter setting bar to the automatic control system full automatic control. Is heated by hot water from the shower spray nozzle on the top of the pipe sterilization, high-temperature water atomized spray nozzle. After completion of the sterilization of solid pre-cooling tank into the pre-cooling zone, pre-cooled before entering the cooling zone. After cooling, the temperature of the tank is generally maintained at 32 ~ 35 ℃, that is able to avoid the precipitation of condensate, and will not affect the quality of the tank liquid.
3, the device structure
Sterilization machine chain plate with 5997 plastic mesh belt, produced by Shanghai reducer 0.55kw drive motor inverter control, belt line speed can be arbitrarily speed motor control and settings. The frame is stainless steel rectangular tube, box with 304 steel, box cover Surrounded by water seal structure. Appliances imported pneumatic components AIRTAC.
4, the main technical parameters
1) Dimensions
The total length of a device:. 17000mm (not including the two ends of the bottle with and console)
b equipment total width:. 3600mm (not including the bottle and with external piping)
. c equipment, the total height: 1700mm (not including external piping)
. d equipment conveyor height: H = 1150mm ~ 1250mm
2) Production capacity: Rating: 300 cans / min
3) packing height: ≤200mm. Can limit the height of the object: ≤250mm
4) Total Power: 20.25KW
5) control voltage: 24 V DC
6) Operating voltage: 380 volts
7) Water pressure: 2 ~ 4kgf / cm2
8) steam pressure: 4 ~ 6kgf / cm2
9) Compressed air pressure: 2 ~ 4kgf / cm2
10) Weight: 13.5 tons
5, the main configurations:
The main frame material: 304 stainless steel
Thickness: 3mm (according to GB)
Main shaft: 100mm * 100mm * 6mm 304 stainless steel
Steam pipes: 304
Main gear: Shanghai Ingram
Conveyor Net: 5997 type of imported plastic
Tunnel continuous mesh belt conveyor spray sterilization machine adopts frequency control;
In addition to the whole network with passive wheels are made of stainless steel outer surface brightening;
Spray stainless steel square tube, curtain-like spray large areas, input type, easy to disassemble and clean, no dead sterilization;
Southern China using special pump pumps;
Regulating the use of Fuyang Jiangnan film;
Each temperature zone automatic temperature control, temperature display, temperature ≤ ± 1 ℃, stable PU value;
PLC, electrical components are imported;
Water consumption: 2.5 tons / hour; Steam consumption: 1.2 tons / hour;
Compressed air consumption: 20m3 / h;
A total of seven temperature zones;
Time is 35-40 minutes out of the bottle.
