工業用風冷式冷水機
Water-cooled Water Chillers
說明：
TIC-A工業用冷水機採用單級蒸汽壓縮迴路，並具有壓縮機過載保護、泵浦過載保護、逆相缺相警示、防止節水保護、高低壓力保護等裝置，機器性能穩定，壽命長。可快速降溫，溫控穩定，滿足客戶要求。此系列產品主要應用冷熱交換的原理進行工作。適用於現代工業中的冷卻領域，且不受環境溫度的影響，是不可或缺的配置設備。
The TIC-A series of water-cooled water chillers use a single closed-loop design for pressurised refrigerant。All models are equipped with compressor and motor overload protection，phase shortage and reversal alarms，anti-freeze thermostat，pressure gauges，etc。They feature excellent performance and a long lifespan。The series of working flow is based on the basic principle of heat exchange。It is applicable to the industry that requires flow of precisely controlled chilled water，and considered as indispensable equipment for modem industry。

本機特點：
1.冷卻溫度範圍7℃-35℃；
2.不鏽鋼保溫水箱，防結冰保護裝置；
3.制冷劑採用R22，制冷效果好；
4.冷凍迴路採用高、低壓開關控制；
5.壓縮機及泵浦均有過載保護；
6.採用意大利原裝精密溫控表，精度達±0.1℃；
7.操作方便，結構簡單，易於維修；
8.低壓泵浦為標準型配備，另可選用中壓或高壓泵浦；
9.可選增加配置水箱液位計；
10.採用谷轉壓縮機；
11.TIC-A風冷式採用套片式冷凝器，傳熱效果佳，散熱快，無需提供冷卻水；
12.改為歐規安全迴路型時，機型后加註“CE”。

Features:
1.Cooling capacity from 7℃ to 35℃；
2.Stainless insulated water tank and anti-freeze thermostat；
3.R22 refrigerant used as standard for efficient cooling；
4.Refrigeration loop controlled by high and low pressure switches；
5.Compressor and pump overioad relays；
6.Italian made temperature controller maintains an accuracy of ±1℃；
7.Compact design，easy to operate and maintain；
8.Low pressure pump are standard configurations，while middleor high presure pumps are optionally availaple
9.Level meter of water of water tank is available as an option；
10.All adopt Copeland compressors；
11.TIC-A adopts tube-fin condenser design without any need of cooling water for excellent heat transfer and rapid cooling；
12.Upon request，it can be built to comply with worldwide electrical safety standards（For example:CE,UL,CSA,JIS etc）。