卷繞機卷繞速度

Take-up speed

6-280m/min

6-280m/min

卷繞最大直徑

Maximum take-up traverse

400mm

400mm

電源

Power supply

AC 380/220V 50Hz/60Hz

AC 380/220V 50Hz/60Hz

卷繞排列方式

Winding Arrangement mode

PLC編程

PLC

排線功率

Arrangement power

25w步進電機(3.5-110MM/S）

25w stepper motor (3.5-110MM/S）

電機功率

Motor power

180W/錠

180W/spindle

電機轉速

Motor speed

2800r/min

2800r/min

連接電纜

Connecting cable

4×1.5mm R.S.J.MP

4×1.5mm R.S.J.MP

纏繞筒管材質

Take-up bobbin material

鐵管、鋁管、塑管等依所需選用

Iron, aluminium and plastic bobbin can be used according to requirement of customer.

纏繞筒管尺寸

Take-up bobbin size

內徑×外徑×長度

38mm×41mm×230/270mm

Internal dia.×Major dia.×L

38mm×41mm×230/270mm

往復行程

Traverse control

203/270mm

203/270mm

單錠面板尺寸

Single spindle panel size

W×L 390×308mm

W×L 390×308mm

其他型號，不詳列於此; 其他尺寸可根據要求製作.

Other models are not completely listed here; Other sizes can be made according to the requirements.

卷繞機卷繞速度可按產品成型要求調節恆定速度

The constant liner speed is adjustable according to product forming requirement

纏繞直徑大於200mm可以在有限範圍內定製

Take-up traverse>200mm can be custom-made in limited range

纏繞筒管尺寸可定製規格

Either internal diameter or length can be custom-made in limited range

往復行程可定製

Other travel can be custom-made in limited range