TL-ST 不銹鋼液位傳感器

產品描述

用於探測油箱或水箱及污水箱的液位，通過浮桶內的磁石產生的磁場驅動相應的電路，輸出相應的電阻值，提供給儀表顯示當前液位。具有性能穩定，易於安裝等優點。傳感器長度、電線長度和阻值範圍可根據客戶的需求而設計。

產品規格︰	Length Measurement: Sending Unit length should be a minimum of 5cm less than the plastic tank depth、and 5 cm less than the metal tank depth. Note: If metal tank surface flexes、deduct 5 cm from the depth. (like plastic tank) Lengths Available: 10 cm through 200 cm with 2.5 increments. Sensor unit lengths、are measured from the top of the threads to probe tip. Material: 316 Type Stainless Steel and operate on a vertical plane (no float arm). Mounting Method: 1.5" NPT.1.5 ” NPT, American pipe thread, male,240 – 30 ohm operation Special Application Senders: For Dual Station、Special ohms ranges (other than 240-30 ohms)、Calibrated、Custom、Adjusted、or Special application units、contact us at by one of the means listed above.
最小訂購量︰	50 pcs
產品交期︰	現貨供應