• 本鉗子可以對寬度不超過110mm的PVC行線槽進行剪切作業。
• 鉗子帶有可調角度定位器，可以對線槽進行45°或者垂直的角度進行剪切。
• 剪切刀片採用8Cr13MoV製成，高硬度、刃口鋒利、剪切順暢，不會由於鏽蝕影響刃口的鈍化。
• 鉗身由碳鋼製成，合理的硬度和強度保証鉗子的耐用性。
• 人體工程化手柄在作業時不易使手部疲勞。
• This tool can cut PVC trunking with a width less than 110mm.
• The tool is equipped with a positioner that adjusts the cutting angle to cut the slot into 45° or 90°.
• The cutting blade is made of 8Cr13MoV, which has high hardness, sharp edge and smooth cutting, and will not affect the passivation of the cutting edge due to rust.
• The parts of this tool are made of carbon steel with reasonable hardness and strength to ensure the durability of the pliers.
• Ergonomically designed handles are less prone to hand fatigue during work.

維護說明：
• 保持鉗子的整潔
• 每使用10天或者300次后請在活動部位點注潤滑油。
注：鉗子的鉗體由鋼製成，塑料手柄由PP製成，請勿廢棄，各材料皆可回收再利用。
Maintenance instructions:
• Please keep the pliers clean and tidy
• Apply lubricant to the active area every 10 or 300 times.
Note: The parts of the pliers are made of steel and plastic PP. Please do not discard them. All materials can be recycled.

SV.010901
剪切寬度Cutting width      ≤110mm
剪切角度Cutting angle      45°/90°
長度Length                       255mm
重量Weight                       0.66kg

使用說明Instructions for use:
① 打開限位鎖扣，使鉗子自動打開。
② 前後調整角度限位器，使之處於最佳作業位置。
③90°剪切
④45°剪切
⑤ 調整合適后即可剪切作業
⑥ 作業結束后必須閉合鉗子關閉鎖扣，防止刀片意外割傷。
①Open the limit lock to open the pliers automatically.
②Move the angle limiter back and forth to the best working position.
③90° Cutting
④45° Cutting
⑤Cutting work
⑥It must be closed after being locked to prevent the blade from accidentally injuring the human body.