干式噴砂機  DRY  BLAST MACHINE

性能好而能耗低。

操作簡單、安全可靠。

機器佔地面積小，而工作艙卻很大。

投資少而收效大。

Versatile Dry Blast Performance With MinimumPower Requirement.

Easy And Safe Operation.

Minimum Space Requirement,But Maximum Area For Component Handling.

And LOW Investment For A High Return.

工作原理：本機通過壓縮空氣形成一個吸入式系統、通過一個高效噴砂槍進行工作。可用各種磨料、玻璃丸和軟磨料加工。

調整簡單：通過貯箱下的調節閥，可以調節磨料噴射濃度，用調節閥可以調節壓縮空氣的壓力，用腳踏開關控制工作的停開。

The Process:TA suction system energized by compressed air through a high efficiency blasting gun which interchangeable airjet combinations for single phase compressor operation.The process will operate with awide range of abrasives,glass beads and softblast grits.

Simple Control:Concentration of media is adjustable at the metering jet below the sump,air pressure is variable at the regulator provided at the operator station and the process is contorlled by a pressure foot switch.

電氣：

電源：220V 50Hz

照明：150W 220V

電機：0.37KW、單相電動機

直接接220V、50Hz電源

Electrical equipment:

Lighting-150Watt for dieect connection to 220V single phase 50Hz supply

Fan Motor: 0.25KW(1/2HP) single phase motor for direct connection to 220V single phase 50Hz supply

壓縮空氣：

接頭尺寸：G1/2”

氣源壓力：0.4~0.6MPa

消耗量：1.5M³/min

Compressed air:

Mains connection: G1/2”

Pressure of Compressed air: 0.4~0.6MPa

Air consumption:1.5 M³/min

技術參數：

外廓尺寸：800mm(寬)X880mm(深)X1750m(高)

艙門尺寸：440mm（長）X610mm（寬）

磨料添加量：5-15kg

噴嘴直徑：φ9.5mm

Outline size: 500mm(wide)X600mm(deep)X1300m(high)

Door：     440mm（W）X610mm(D)

Initial media charge:5-15kg

Bore of process gun: φ9.5mm