PUNCHING MACHINE
氣壓打眼機

用途：適用各種玩具大小型號眼睛、鼻子的安裝，利用氣動壓力將玩具上眼睛壓入戒子中來完成釘眼工序；亦適用於乳膠軟管類打眼穿孔。

特點：1、採用尼龍軟膠沖壓頭，受力均勻，保護眼鼻表面不受挫；
2、腳踏式氣動開關，有利操作員更專心對眼鼻的定位；
3、使用氣源過濾器，有效過濾壓縮機中的水、油等物質，壓力大小可調，確保拉力測試；
4、多款打眼、鼻模，5—20mm直徑孔模，更換自如。

技術參數：

規格：1200×600×1200（mm）工作台面高700mm
重量：50kg
工作氣壓：0～100PSI  0～7000G/㎝
輸入氣壓: 8kg  壓力25-30kg
工作效率: 1次/秒,兩氣缸

PUNCHING MACHINE

Usage: this machine is a specialized device for making toys and is fit for fixing toy eyes and noses of every size by the pneumatic pressure.

Features:
1  The punching head is covered by low durometer rubber so that it accepts the force homogeneously/equably and can protect the operator’s face from being injured.
2  Pneumatic pedal switch can make the operator pay more attention to the work.
3  The gas source filter filtrates the water, oil and so on from the compression engine. The pressure can be adjusted. The pulling force tests are safe.
4  Various moulds to choose, and the diameter is 4-12mm

Technology parameter/data:

Specification: 1200×600×1200（mm）
Weight: 50KG
(Working) Air-Pressure: 0～100PSI  0～7000G/㎝