產 品 名 稱

高溫膠（THO4059）

概       述

本品系環氧樹脂膠粘劑，單組份，加熱快速固化，粘接強度高，耐溫性優良,操作簡便。

適 用 范 圍

適用於高溫條件下工作的金屬、陶瓷、復合材料（PCB等）的自粘與互粘，也適用於修復以及電器、儀表的發熱部件的粘接和密封以及高溫回流焊。

性

能

特

點

·外觀：為淺色粘稠液體，無固體顆粒。

·固化速度快，100℃時，0。45-1小時初固化，完全冷卻后即接近最大粘接強度。

·粘接強度高，耐久、耐紫外光性能優良。

·耐溫性能好，適應溫度範圍廣，粘接后在較高的溫度下仍有較好的粘接效果。

·粘接表面無需嚴格處理，兩組份等量調配，使用方便。

·耐介質性能優良，耐油、水、酸、煤油、乙醇等。

·安全及毒性特征：有極輕微異味，無吸入危險，固化后實際無毒。

·貯存穩定性較好，貯存期為半年。

主要技術性能指標如下：

耐溫範圍:-40－+380℃

粘接強度:

常溫:拉伸強度≥25MPa; 剪切強度≥20 MPa

150℃:拉伸強度  3－5 MPa

使 用

方 法

1、將被粘物除鏽、去污、擦淨。

3、將膠液塗于被粘物表面，合攏、壓實、靜置加熱1小時。（100度）（

 注 意

 事 項

1、 取膠工具絕不可混用。

2、 操作環境注意通風。

3、 膠液如觸及皮膚，可及時用肥皂水沖洗.

4、 未用完的膠應蓋好，置於陰涼通風處。

Product range

High temperature Adhesive（THO4059）

Outline

This strain acrylic acid polyester adhesive, the one component, the normal temperature fast solidification, the cementation intensity is high, the heat resistance is fine,Operates easily.

Applications

Is suitable the metal, the ceramics, the compound materials which works under the hot conditions from stick with stick mutually, also is suitable for each kind of vessel divulging(PCB etc), the cylinder body crack, the casting cementation, the packing, the seal, stops up leaks with the repair as well as the electric appliance, the measuring appliance gives off heat the part cementation and the seal.

Features

· outward appearance: It is tinted thick liquid, non-solid particle..

· the curing velocity is quick, when 100℃;, 0.45-1hour at the beginning of minute solidifies, 0.45—1hour and cooler it  then it close biggest cementation intensities.

· the cementation intensity is high, durable, bears the ultraviolet ray performance to be fine.

· the heat resistant performance is good, the adaptation temperature range is broad, after the cementation still had the good cementation effect under the high temperature.

· the cementation surface does not need to process strictly, two component isometric mix, easy to operate.

· bears the medium performance to be fine, oil resistant, water, acid, petroleum, ethyl alcohol and so on.

· security and toxic characteristic: Has the extremely slight unusual smell, non-inspiration danger, after solidification actual non-toxic. · the storing stability is good, the storage time is half year.

The main technical performance target is as follows:

Heat resistance scope：-40－+380℃

Cementation intensity:

Normal temperature: Longitudinal strength≥25MPa; Shearing strength≥20 MPa

150℃: Longitudinal strength  3－5 MPa

Instruction

1. Clean the surface of the material,make  sure  they have no dusty or  oil on them,Wait until they are dry.

3.Will adjust theadhesive stuck the surface, will close up, the compaction, settles and hot  it 0.45—1hour(100℃).

Notes

1.The Adhesive tool does not to be  mix used.

2. It has odor of  acrylic ,it is  necessary to keep it well ventilated and away from fire .

3.IF it is touché the skin, must to be prompt with the soapy water.

4.Caps of  adhesive tube cannot be exchanged to avoid going bad and losing efficacy .It can be stored at well-ventilated places with low temperature,and away from fire.