Flow Range

1000 to 5000 ml/min (5 to 500 ml/min requires optional low flow adapter kit)

Compensation Range

5000 ml/min at 10 inches water back pressure
4000 ml/min at 20 inches water back pressure
2000 ml/min at 50 inches water back pressure

Typical Back Pressure of Sampling Media (inches water)

Compare the information in this table to pump compensation range to determine appropriate applications.

Flow Compensation System

Patented isothermal closed loop flow sensor
(U.S. Patent No. 5,892,160)

Accuracies

Timing: 1 min/mo at 25 C
Flow Rate: ± 5% of set-point after calibration to desired flow

Battery Charge Level Indicator

Icon displays on LCD at full, mid, low charge, imminent low battery fault, and low battery fault.

Temperature Range

Operating: 32 to 113 F (0 to 45 C)
Charging: 32 to 113 F (0 to 45 C)
Storage: -4 to 113 F (-20 to 45 C)

Typical Run Times

XR5000 Model

2 L/min

5 L/min

High-power Li-Ion

40 hrs

22 hrs

Standard Li-Ion

20 hrs

11 hrs

Alkaline

18 hrs

8 hrs

Timer Display Range

1 to 9999 minutes (6.8 days). If run time exceeds 6.8 days, timer display rolls over.

Flow Fault

If pump is unable to compensate for > 15 seconds due to excessive back pressure, the pump stops and holds run time display. Auto-restart is attempted every 15 seconds up to 5 times.

Low Battery Fault

15 sec to sleep

Auto-off

5 min of inactivity

Battery Pack
(model dependent)

High-power Li-Ion (4 cell), rechargeable, 7.4 V, 4.4 Ah capacity
or
Standard Li-Ion (2 cell), rechargeable, 7.4 V, 2.2 Ah capacity
or
Alkaline (6 cell), disposable, size AA, 1.5 V (nominal)

Battery Recharge Time
(with SKC-approved charger)

Standard Li-Ion (2 cell): approximately 4 hrs
High-power Li-Ion (4 cell): approximately 8 hrs

Size

High-power Li-Ion and alkaline models: 5.5 x 3 x 2.3 in (14 x 7.6 x 5.8 cm)
Standard Li-Ion model: 4.3 x 3 x 2.3 in (10.9 x 7.6 x 5.8 cm)

Weight

High-power Li-Ion model: 21 oz (0.6 kg)
Standard Li-Ion model: 16 oz (0.45 kg)
Alkaline model: 17 oz (0.48 kg)

Case

Anti-static plastic

RFI/EMI Shielding

CE marked for RFI/EMI protection

Approvals

for use in hazardous locations. Models that are UL Listed for intrinsic safety contain the logo on the label. These models must be used with battery pack Cat. No. P85004 or P85002 to maintain the UL intrinsic safety listing.

Description

Cat. No.

Pump with battery, requires charger, see kits or charger below

210-5001

Single Pump Kit includes pump, charger (100-240 V), cassette holder, and soft-side nylon carry case

210-5001K

Five-pack High Flow Pump Kit includes 5 pumps, single chargers (100-240 V), and cassette holders in a Pelican case