供應TFP410PAP 長期現貨 全新原裝 假一罰十

與TFP401APZP配套使用

特性

• Digital Visual Interface (DVI) Compliant(1)
• Supports Pixel Rates Up to 165 MHz (Including 1080p and WUXGA at 60Hz)
• Universal Graphics Controller Interface
  • 12-Bit, Dual-Edge and 24-Bit, Single-Edge Input Modes
  • Adjustable 1.1 V to 1.8 V and Standard 3.3 V CMOS Input Signal Levels
  • Fully Differential and Single-Ended Input Clocking Modes
  • Standard Intel 12-Bit Digital Video Port Compatible 
    as on Intel™ 81x Chipsets
• Enhanced PLL Noise Immunity
  • On-Chip Regulators and Bypass Capacitors for Reducing System Costs
• Enhanced Jitter Performance
  • No HSYNC Jitter Anomaly
  • Negligible Data-Dependent Jitter
• Programmable Using I2C Serial Interface
• Monitor Detection Through Hot-Plug and Receiver Detection
• Single 3.3-V Supply Operation
•  
• 64-Pin TQFP Using TI’s PowerPAD™ Package
• TI’s Advanced 0.18 µm EPIC-5™ CMOS Process Technology
• Pin Compatible With SiI164 DVI Transmitter

(1) The digital visual interface (DVI) specification is an industry standard developed by the digital display working group (DDWG) for high-speed digital connection to digital displays and has been adopted by industry-leading PC and consumer electronics manufacturers. The TFP410 is compliant to the DVI Revision 1.0 specification. 
PanelBus, PowerPAD, and EPIC-5 are trademarks of Texas Instruments. 
VESA is a trademark of Video Electronics Standards Association. 
Intel is a trademark of Intel Corporation.