GSM alarm system with telephon

產品描述

Can store and dial 5 phone numbers (no longer than 16 character each one). If an alarm occurs, numbers will be dialed in order starting with last stored.. You can set to dial monitoring center, police and owners, it can also send the SMS before calling.
Using remote controllers you can arm, disarm, panic from long distance.
You can control the system by using a telephone anytime, wherever you are. For security reasons a PIN code must be used for access.
Supports all kinds of wireless sensors, such as PIR detectors, door (gap) sensors, gas sensors, smoke sensors; panic buttons and infrared balusters are available.
Supports any combination of wired/wireless sensors, as you need.
No need for fixed telephone line. Is very suitable for cottage, house, shop, garage, everywhere a GSM Network is present.
For weak GSM signal area an external antenna can be used.
Three open collector outputs available to be used according to customer demands.
One onboard relay available for customer application.
With the telephone function, to show phone number, choose rings, re-dial. phone number and so on.
Easy to be installed and operated according to the instructions from this manual.
Can work with all kinds of wireless detectors or sensors, such as wireless PIR Sensors, beams, gas/smoke detectors, wireless panic buttons

Technical Parameters ：

Standard pack components :
1 main panel, 1 wireless PIR sensor, 1 wireless door sensor, 1 siren, 2 remote controllers, 1 power supply and manual

Weight: 1.5Kg/set