G60-12A 12V 智能鉛酸電池充電器,電動車充電器,汽車電瓶充電器

• • 

  • 產品技術規格書
    輸入: 100~240V
    輸出: 13.8V 3.3A
    充電方式: 智能四段式 ，可修復久置硫化失效電池
    狀態顯示: 特有電池電量狀態顯示，25%-100%
    輸出保護: 短路保護、輸出反接保護
    安全認証: CE cUL
    外型尺寸: 120 x 67 x 41mm
    適用電池範圍: 12 Volt    4~40Ah 鉛酸蓄電池充電器

G60-12A is a main member of digital-chargers from Green Digital Power-tech Co., Ltd. It represents today's new technology for lead-acid type battery charging. G60-12A programmed four auto stages (Ud-Im-Uo-Up) charging process, It is designed for all kinds of 12V 7~80Ah lead-acid battery, such as SLA, AGM and Gel battery.  Stage "Ud" desulfurating the battery through 18V pulse，When the battery recovered, stage "Im" will give bulk current charging( 3.3A or 2.0A). Then, "Uo" stage is followed, the output voltage is limited on 14.7V; When the battery is nearly full, stage"Up" will turn on duty.  At this stage, the battery is charged completely and the charger give some pulse to maintenance the battery.

Further, G60 can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.

For more safety, G60 will inter protection mode when the battery polarity reversed or the output connectors shorted. 

Specification for G60-12A

How to use:

1.    Connect the AC cord to the socket, The "power" lamp will light on RED. 

2.    Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, all lamps will flashing, please check the setup.

3.    Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.

The table shows the duration of the Bulk stepup to about 80% state of charge.