一次完成排線多個焊點焊接，即刻提高焊接效率；恆溫控制，保証焊錫均勻鋪展；焊點光亮均勻；焊點牢固，一致性好；無手工焊接缺陷：如易短路，焊不牢，焊點不一致，不好操作等。主要應用於PCB基板、FPC、FFC的焊接，LCD和TCP的ACF連接，各種線圈的絕緣漆包和端子的直接連接，可塑性塑料的加熱接合等。運用該焊接方式不會發生虛焊現象，能夠實現一次多點的焊接，可以不用顧及人員的操作技能，確保焊接質量。

Efficient welding; good welding quality; no manual weld defects: such as easy to short circuit, solder is not strong, spot inconsistencies, it is difficult to operate. Mainly used in PCB substrate, FPC, FFC welding, LCD and the TCP connection of ACF, all kinds of insulated copper magnet coils and the terminals of the direct connection of the heating junction plasticity, such as plastic. Use of the welding to achieve a multi-point welding, you can not take into account the skills of personnel to ensure the welding quality.
1, the use of advanced temperature control system control segment, given the flexibility to set the temperature state of the paragraphs. Temperature and time parameters can be controlled accurately.
2, the stability of the rapid warming, local transient heating can be a good way to curb the surrounding heat-affected components.
4, the closed-loop thermocouple feedback online to improve temperature control accuracy.
5, welding pressure, welding time, welding temperature regulation may be accurate.
6, can store 20 groups of welding parameters very convenient replacement products.
7, more than one-spot, high efficiency, consistency, and high strength welding, solder joint appearance, simple operation.
8, less consumables, the use of low cost.