The HFX Series II joystick is a long life cycle, Hall effect controller providing reliable multi-axis finger positioning control. Available in single, dual, and triple axis configurations, HFX Series II joysticks are ideal for clean environment, finger operated applications requiring increased durability and reliability. Widely used applications include on-road enclosed cabin vehicles, electric wheelchairs and kiosk integration. Key Features • Finger positioning control • Hall effect sensing • Available with USB • Single, dual or triple axis control • RoHS compliant • 10 million life cycles • Environmental Protection Classification (IP Rating): contact factory

Model 1100:	Two axis
Model 1200:	Two axis with buttons
Model 1300:	Three axis
Model 1400:	Three axis with buttons

Joystick Travel:	40° (20° from center)
Centering:	Single spring, omnidirectional
Housing:	High impact glass-filled nylon
Operation force:	0.257 Nm
Breakout force:	0.128 Nm
Maximum force:	0.385 Nm
Operating temperature:	-40°C to 85°C
Life cycles:	10,000,000

Supply voltage:	5.0V (Except w/ voltage regulator option)
Center voltage	2.5V
Supply current:	10mA max/axis
Output current:	2mA max/axis
Output tolerance:	±2%

Configuration Options

0V to 5.0V

0.25V to 4.75V

0.5V to 4.5V

USB
Universal Serial Bus provides USB 1.1 interface, no driver is needed.

Analog Deadband
Assures return to center voltage

Center Detect
Produces an electrical HI signal when stick is moved off center and produces an electrical LO signal if the sensor output voltage deviates from range (<0.5V or >4.5V).

Dual Decode
Provides center detect function and monitors dual sensors. If the sum and the difference of the sensor outputs vary by more than 9%, the circuit becomes electrically LO. Requires dual sensors and output option 0.5V to 4.5V.

Joyball
Cursor emulation available for USB or Sun.

Voltage Regulator
Used when input or output voltage is greater than 5V or when bipolar output is required. Contact technical support for available configurations.

CANbus
Provides J1939 interface and requires Sensor Output Option (0.25V - 4.75V). Contact technical support for configuration chart.

Discrete Output
Electronic "Switch Stick".

Friction Clutch
The joystick does not mechanically return to center, maintains present position. Requires "round" limiter plate option.

 

HFX Series II Cutout and Mounting Dimensions

 

Technical Drawings

Model-1100 Option 0.pdf

Model-1100 Option 1.pdf

Model-1200 Option 2.pdf

Model-1300 Option 3.pdf

Model-1300 Option 6.pdf

Model-1400 Option 4.pdf

Model-1400 Option 5.pdf