詳情請進網址www.wxhaojing.com
焊接質量、性能方面毋庸質疑,對維修環保方面的考慮也細緻週到。
詳情請進網址www.wxhaojing.com
● 直接式加壓機構,應急性能好,焊接速度快
導向部採用磨擦力小的特殊材料,電磁氣閥與氣缸直接連接,加快動作反應速度,提高打點速度,並可減少空氣流動的損耗。
● 任意調整加壓速度
可任意調整加壓頭的下降速度,緩和了對被焊物加壓時的衝擊,也減少了噪音。
● 安全、使用方便的高性能氣路系統
過濾杯設有護罩,可防止杯子破損時的碎片飛濺,亦可保護從外部所受碰撞的衝擊,杯子和護罩可裝卸,檢修容易。
● 採用節水型強制冷卻方式
採用循環式冷卻水,避免水的浪費,大幅度減少冷卻水量。
● 高牢固強度的機體結構
具有抗衝擊、振動的剛性,可防止加壓時的電極頭滑動,實現穩定焊接。
● 上部絕緣,簡單實用
二次導體採用上部絕緣方式,要避免鐵屑的附着或下座安裝焊接工裝時易產生的絕緣部位的短路事故。
● 主迴路採用大功率SCR無觸點開關
主迴路採用水冷大功率可控硅元件,輸出電源強勁、穩定,可靠性強。
Direct press mechanism,good urgency performance and high welding speed
The guide uses special material with low fuction.
Electromagnetic air value is directly connected with air cylinder to quicken reaction.
Adjustable pressing speeds
Down speed of the press head can be adjusted as necessary,thus to relieve pressing shock and reduce noise.
Safe,easy-to-use and high-performance airline system
Filter cup is equipped with protection cover,which can prevent scrap can be when cup breaks and can protect filter cup from external shock,The cup and cover are removable and maintenance canbe performed easily.
Water-saving type forced cooling system
Cycle cooling water system can avoid waste of water,thus largely reduce required amount of cooling water.
High-strength body structure
It has the rigidity enough to withstand shocks and vibrations,prevent electrode slide and stabilize welding process.
Upper insulation, simple to use
The secondary conductor uses upper insulation arrangement,this can avoid short circuits all the insulation portion when the lower base is mounted with welding tooling.
Main circuit uses large-power SCR contactless switch
Main circuit uses water-cooled large power sili controlled rectifying element,the power output is powerful,stable and reliable.
項目(單位) \ 型號 |
DN-16 |
DN-25 |
D(T)N-40 |
額定容量 |
KVA |
16 |
25 |
40 |
額定初級電壓 |
V |
380 |
380 |
380 |
額定頻率 |
Hz |
50/60 |
50/60 |
50/60 |
最大短路電流 |
A |
10500 |
13500 |
17500 |
最大焊接輸入 |
KVA |
30 |
45 |
73 |
負載持續率 |
% |
50 |
50 |
50 |
臂伸尺寸 |
mm |
220X500 |
220X500 |
220X500 |
最大加壓力 |
N |
3900 |
3900 |
6000 |
電極行程 |
mm |
60 |
60 |
60 |
冷卻水量 |
L/min |
3 |
3 |
4 |
重量 |
kg |
200 |
220 |
280 |
電極尺寸 |
電極頭 |
mm |
φ13 |
φ13 |
φ16 |
電極握杆 |
mm |
φ20X180 |
φ20X181 |
φ25X190 |
電極臂 |
mm |
φ50X150 |
φ50X150 |
φ60X200 |
凸焊台 |
mm |
|
|
110X130 |
焊接能力 |
低碳鋼二塊疊焊 |
mm |
2.0+2.0 |
2.5+2.5
|
3.0+3.0 |
|