簡單介紹

差分探頭的詳細介紹

Mode	SI-9101	SI-9110
Attenuation Ratio CMRR (typical)	1:10/100 -85dB@50Hz, -55dB@1MHz	1:100/1000 -80dB@60Hz, -50dB@1MHz
Differential Input voltage (DC+Peak AC)	+/-70V@1/10 +/-700V@1/100	+/-140V@1/100 +/-1400V@1/1000
Common Mode Voltage (DC+Peak AC)	+/-700V@1/10 & 1/100	+/-1400V@1/100 & 1/1000
Absolute Max. Input (Each side to ground)	1000Vrms CAT III	1000Vrms CAT III
Bandwidth	DC to 100MHz (-3dB)
Accuracy	+/- 2%
Input Impedance	4Mohm//7pF each side to ground
Output Voltage
- Swing (into 50kohm load)	+/-7V
-Offset (typical)	<+/-5mV
-Noise (typical)	0.9mVrms
-Source Impedance (typical)	50 ohm (for using 1M ohm input system oscilloscope)
Power Requirements
-Standard	4xAA cells or 6VDC/200mA mains adaptor ** or regulated 9VDC/120mA mains adaptor **
-Options	Power leads
Length of BNC Cable	90cm
Length of Input Leads	30cm
Weight	500g
Dimension (LxWxH)	202mm x 83mm x 38mm

臺灣三華(sapphire)SI-9110 有源差分探頭,咨詢電話:0512-68551216/68551217/65090040。