Ⅰ、Brief Description

產品簡述

PLATIVE PPC7703, the peelable protective paint, is specialized applied to silk screen printing, pad printing, spraying, and so on. acid or alkali resistance, corrosion resistance, good adhesion, and fast-drying, peeling easy.

PLATIVE PPC7703 可撕保護漆，專門開發應用於絲印移印噴塗等加工過程的保護作用，耐酸碱，耐侵蝕，附着力好，快干，方便剝離。

Ⅱ、Operational Guidance

操作嚮導

         First, to clean and dry the surface, make sure no grease, no dust. Second, to paint the surface where prevent from printing next (ALATIVE T7701 can be used to dilute the product). Then, forced dry at 70 ℃ before printing. After printing, the coating can be manual stripping, or peeled with adhesive tape.

先清潔並乾燥工件表面，確定無油污、無灰塵；再將PLATIVE PPC7703塗于需保護位置（可用ALATIVE T7701稀釋至需要稠度） ；然後70℃烘乾，即可進行印刷加工；加工后，PLATIVE PPC7703塗層可手工剝離，或者用膠帶粘離。

Ⅲ、Annotation

附註

         Before use, low-speed mixing uniform of PLATIVE PPC7703 is required; dilute the product with special additives ALATIVE T7701,or else it could lead to paint deterioration; the film with a certain thickness, is in order to peeling easy after printing.

PLATIVE PPC7703使用前，需低速攪拌均勻；稀釋時請使用專用添加劑T7701，否則可能導致油漆變質；塗膜需有一定厚度，印刷加工后剝離。