|
Compact spindle servomotors. 緊湊型主軸伺服電動機。
Based on flux concentration technology and controlled by the DIGIVEX Drive range, the HV synchronous servomotors are designed for the spindle motorisation of conventional machines.基於通量濃度控制技術和範圍由DIGIVEX車道，在高壓同步伺服電動機是專為常規機主軸摩托的。
Developed by Parvex, this technology enables a range of constant power to speed ratio of up to 10 to be covered. Parvex由開發，這項技術實現了功率範圍的不斷加快，以10比的是包括在內。 And the HV motors have dynamic characteristics equivalent to axis servomotors : very high mass to torque ratio, low inertia, high torque at standstill ...而高壓電動機具有動態特性相當于軸伺服電機：非常高的質量比對扭矩，低慣性，在停頓高扭矩...
|
 High torque/weight ratio for increased machine compactness 高扭矩/重量比緊機增加
Low inertia for rapid changes in speed 低慣量在快速變化的速度
Exceptional regulation at low speed 特殊監管低速
Wide speed range at constant power : ratio up to 10 寬恆功率速度範圍為：比例高達10
High torque at standstill 高扭矩癱瘓
Possibility of positioning for tool changes 變化的可能性定位工具
|
 Click here for "HV/HW-Series Servo Motors" PDF (257k) 點擊這裡為“高壓/硬件系列伺服電機”PDF格式（257k）
|
| |
Examples of applications 應用實例
Because of their high dynamic qualities and their compactness, HV spindle motors are suitable for the motorisation of high performance spindles (lathes, milling machines, grinders,…).由於其高動態素質和緊湊，主軸電機主軸高壓適合表現的摩托高（車床，銑床，磨床，...）。
They are controlled by the DIGIVEX Drive range which provides them with all their qualities and flexibility of use.他們控制的DIGIVEX車道範圍內的使用他們提供的一切素質和靈活性。
Synchronous spindle technology is also available for electrospindles with the HW range.同步主軸技術也為electrospindles範圍內使用硬件的。
|
| |
|
| |
A range suited to your needs 一個適合您的需求範圍
The HV motors are available for :在高壓電動機可用於：
Torque from 17 to 240 Nm (150 to 2110 in-lb.)扭矩從17至240牛頓米（150至2110在磅）。
Speeds up to 8000 rpm速度高達8000轉
Power from 3 to 45 kW (4 to 60 hp)功率從3至45千瓦（4至60馬力）
These motors use flux concentration technology which enables the construction to be more compact and more robust.這些電機的使用量的影響技術，使建築更緊湊，更強大。
They are characterised by constant torque at low speed, and constant power over a wide range of speeds (1:10), achieved by DIGIVEX Drive.他們的特點是在低速恆轉矩和恆功率速度超過了範圍廣氾（1:10），驅動實現DIGIVEX。
Their low inertia enables greater acceleration for reduction of tool change time and more rapid cycles其低慣性使更多的循環加速急速減少換刀時間和更多
|
|
