SDL-U0616L-12A

DC12V/0.6A/17.5
性能優劣：
1. 電磁鐵鐵芯耐磨，撞擊性好，長年使用頂部無損
2. 鐵芯活動靈活，反應速度快            
3. 電磁鐵的線軸採用美國杜邦材料耐高溫耐磨損
4. 電磁鐵溫升50～220℃其吸力仍穩定安全可靠
5. 電磁鐵溫升50～220℃其彈簧彈力仍穩定。
6. 電磁鐵的鐵芯不用油浸，使用壽命更長
7. 電磁鐵的鐵芯運行定位精準
8. 高頻運行時鐵芯活動穩定，無抖晃現象
9. 耐高壓可達到1500V～1800V/2MA左右
10. 電磁鐵的線圈是採用德國漆包線繞制而成。
11. 電磁鐵的線圈導電性好、耗電少、發熱量低、耐溫180℃、最高可達210℃。
12. 製作電磁鐵使用的所有材料采均採用環保處理，無毒，無污染，安全可靠。
13. 鐵芯採用特殊工藝製成。耐磨、撞擊性好，長年使用頂部無磨損。
14. 保持式電磁鐵採用優質磁鐵，磁鐵吸力穩定，安全可靠
15. 電磁鐵支架正常運行100萬次以上不脫落
16. 電磁鐵在250度高溫下運作正常。

DC12V/0.6A/17.5

Performance advantages and disadvantages:

Electromagnet core wear, impact, and used for many years at the top of non-destructive

2 core flexible, fast response

3 electromagnet spools uses the DuPont materials are high temperature wear resistance

4 solenoid temperature rise of 50 ° C to 100 ° C remained stable and safe and reliable suction

5 solenoid temperature rise of 50 ° C to 100 ° C remained stable spring force.

The core of the electromagnet without oil immersion, longer life

Electromagnet core running precise positioning

High-frequency operation stable core activities, wow and flutter phenomenon

High pressure up to about 1500V to 1800V/2MA

10 coil of the electromagnet Germany enameled wire around the system.

11 coil of the electromagnet conductivity, low power consumption, low heat, a temperature of 180 ° C up to 210 ° C.

12. Mining of all materials used in the production electromagnet are used to dealing with environmental protection, non-toxic, non-polluting, safe and reliable.

13 core made ​​using a special process. Abrasion resistance, impact resistance, used for many years at the top no wear.

14 Keep Solenoid quality magnet magnet suction stable, safe and reliable

15. Normal operation of the solenoid bracket than 100 million times do not fall off

16 electromagnet in a reasonable environment, life can be up to 5 years or more