頂驅
| 型號： | DQ40----DQ120 |
|---|---|
| 品牌： | - |
| 原產地： | 中國 |
| 類別： | 工業設備 / 其他工業設備 |
| 標籤︰ | 頂驅 |
| 單價： |
-
|
| 最少訂量： | - |
產品描述
採用先進成熟的交流變頻驅動技術，具有轉矩和速度控制等優點，電氣系統驅動方式靈活，在司鑽操作臺上可以直接選擇電機運行模式（不需要修改用戶程序或者系統參數），這種控制模式方便靈活。
技術特點
一次可鑽進28米長一個立根，上卸扣時間減少了三分之二；
在起鑽時若遇阻卡可迅速接上鑽具，一邊旋轉，一邊循環泥漿；
進行倒划眼和下鑽划眼，大範圍活動鑽具，減少了卡鑽事故；
由於有遙控的內防噴控制機構，井控安全；
在額定扭矩下連續堵轉運行；
單雙電機運行切換；
技術參數設置合理，自動化程度高，程序運行可靠。
Top drive system
It can drill 28m long once,when touching resistance and touching sticking,it may connect the drilling pipe immediately,rotating and circulating.
It can implement back redressing and snubbing redressing.
The drilling tool can work in a wide range and it is helpful to reduce drill sticking accidents.Since it has remotely-controlled internal blowout control mechanism,the well control is safe.
It can work continuously in a locked running mode at rated torque.
The single and double-motor running modes can be changed over to each other easily.
It can implement back redressing and snubbing redressing.
The drilling tool can work in a wide range and it is helpful to reduce drill sticking accidents.Since it has remotely-controlled internal blowout control mechanism,the well control is safe.
It can work continuously in a locked running mode at rated torque.
The single and double-motor running modes can be changed over to each other easily.
The technical parameters are set reasonable and its automation degree is high and the programs run reliable
Model:DQ40----DQ120(2250kN----9000kN)
會員信息
| 四川勵達石油機械工程有限公司 | |
|---|---|
| 國家/地區︰ | 四川省0 |
| 經營性質︰ | 生產商 |
| 聯繫電話︰ | 15882041506 |
| 聯繫人︰ | 龐永輝 (項目經理) |
| 最後上線︰ | 2010/04/13 |
