將該檢測器插入汽車點煙器口,用於測量汽車電瓶工作狀況,當打開汽車鑰匙未啟動發動機時,該檢測器顯示值正常在12V左右;當啟動后汽車電瓶開始充電,該檢測器顯示值應為13V~15V之間,此時可放心使用或行駛。
This battery meter is designed to measure the battery condition by pl ing it in cigarette lighting socket. Before igniting the engine, the meter shows 12 v on the screen. As the engine is ignited, 13 v ~ 15 v should appear on the screen, indicating it is in normal operating condition.
當汽車發動不着時,該檢測器顯示值低於10V,則表示dianping電量嚴重不足,此時應及時充電或更換電瓶,車輛啟動后將自動給電瓶充電,約一個小時后,即可正常使用電瓶啟動車輛。
If an engine fails to ignite, the meter will display 10 v or less on screen. It is then necessary to recharge, or replace the battery. After the engine runs about one hour charging the battery, it is back to operating condition.
特別說明:
該電瓶電壓檢測器適用於12-24V汽車點煙器插口。
該產品內置0.5A安全熔斷管。若無顯示時,請擰開檢測器頭部,檢查玻璃熔斷管是否熔斷,若熔斷,請更換相同規格的熔斷管。