44鍵RGB紅外控制器 DC12 6A (中國生產商) - 電氣控制系統

44鍵RGB紅外控制器 DC12 6A

型號：	-
品牌：	-
原產地：	中國
類別：	電子、電力 / 電氣控制系統
標籤︰	44鍵紅外七彩 , RGB控制器 , 5050燈條
單價：	¥22 / 件
最少訂量：	10 件

發送查詢

產品描述

Operation lnstructions of controller

Ⅰ.Specifications:
Working temperature:-20-60℃			Supply voltage:DC12V
Package size:L150W55H55MM			Max load current:2A each color
Connecting Mode:Common anode
Ⅱ.Control Method:
Adopt IR remoter to control the led controller,which has 24 buttons,the
function of each button as the table below:
Brightness rise	Brightness fall	Pause/Run	On/Off
Static red	Static green	Static blue	Static white
Static orange	Static light green	Static dark blue	Static milk white
Static dark yellow	Static cyan	Static lyons blue	Static white pink
Static yellow	Static light blue	Static purple	Static green-white
Static light yellow	Static sky blue	Static brown	Static blue white
lncrease red	lncrease green	lncrease blue	Speed up
Decrease red	Decrease green	Decreaseblue	Speed-down
DIY key1	DIY key2	DIY key3	Automaticchange
DIY key4	DIY key5	DIY key6	Flash on and off
3color jumpy change	7color jumpy change	3color fade change	7color fede change
About DIY key,when it's pressed first time,will enter the DIY color mode,you can
adjust the color per the 6 keys at above to increase or decrease the R/G/B color
by yourself freely (if other key is pressed this time,will jump out from DIY color
mode).And you can save the color which you have adjusted by pressing the DIY key once
again.When next time this key is pressed,it will show the color you saved last time
There are 6 DIY keys,so you can save 6 color you like.They are all lndependent,have
no effect each other .Forexample:if you press DIY key1 first,and then press DIY key2,
DIY key1 will be invalid,until DIY key2 is pressed once again,current color will be saved
Ⅲ.Panel specification and connecting drawing as follows:

1, 20, 31, 16, 4, 38, 38, 5 False False Bitmap
				IV.Watning:
				1.Supply voltage of this product ls DC12V never connect to DC24V or AC220V
				2.Never connect two wires directiy in case of short circuit.
				3.Lead wire should be connected correctly according to colors that connecting diagram offers.
				4.Warranty of this product is one year,in this pericd we guarantee replacement or repairing
				with no charge,but exclude the artificlal situation of damaged or overload working

44鍵紅外L

賣家須知:下單須註明出線排序(默認出貨為＋GRB)

共陽出線排序分別如下三種：

＋RGB ＋GRB ＋BGR

1線正極（電源為正極）2/3/4線負極（RGB為負極）

規格/ 說明：
44鍵紅外控制器用於控制各種以LED為光源的燈具，例如：LED模組，LED軟光條，LED鋁條燈，LED點光源等等；具有價格低廉，接線方便，使用簡單等優點；可通過紅外遙控器進行靜態亮度調節，動態亮度或速度調節等功能。

一、技術參數
    ● 工作溫度：-20-60℃
    ● 供電電壓：DC12V
    ● 輸出：3迴路
    ● 連接方式：共陽（訂貨需註明出線排序）
    ● 外型尺寸：L63ΧW35ΧH22 mm
    ● 淨重：70g
    ● 輸出電流：<2A(每迴路)
    ● 輸出功率：12V<72W