WINKING EPOXY ADHESION SYSTEM

GENERAL DESCRIPTION
 
This is an one component,solvent free,hot curing system,rigid epoxy adhesive and insulation for blob top.It is suitable for the high quality electrical

industry.The material can be mixed with solvent to lowe the viscosity.

PROPERTIES OF UNCURED  MATERIAL: (@25℃)

1.Appearance:                           Black  dense  Liquid 
2.Viscosity:                            80,000-90,000  cps
3.Density:                              1.6
4.Shelf  Life:                          at  5℃    at  25℃   at  40℃
                                        6 Months   3 Months   2 Weeks        
5.Gel  Time:                            120℃/15min  :  150℃/10min
6.Curing  Time:                         120℃/2Hrs   :  150℃/1Hrs

PROPERTIES  OF  CURED  (Curing  Condition: 120℃/2 Hrs)

Hardness                     Shore D           90     ASTM  D2240
H.D.T.                         ℃             155     ASTM  D684
Moisture  absorption         @100℃/1 Hrs    0.27     ASTM  D570
Glass transition temperature   ℃             140     ASTM  D256
Thermal shock (no cracking)  10 cycles    -55 to130℃ ASTM  D1674
Cofficient of linear
Themal expansion             cm/℃        4.5X10-4    ASTM  D150
Thermal  conductivity        cal/cm.sec℃ 8.2×10-4   ASTM  D1674
Linermal shremkage             ％             0.2     ASTM  D2566

NOTE:
*Keep in cool low temperature(@5℃ or below) avoid moisture and sun shine directiy, to keep long using.

*Avoid conlact of the skin ,eyes and clothes,in case of contact,just wash wish soap and water immediately.

包裝規格：  1 KG /罐 (12KG/箱)

具體應用如圖：（用在鐵芯與金屬片接着）