快速換模系統具有如下優點：
一、 安裝簡便，在安裝過程中注塑機無需任何改變。
二、 安全係數高，磁力強，斷電不斷磁，磁力不隨時間及溫度的影響而消失或減退。

三、 使用快速換模系統，可大大地提高換模效率，減少換模時間

四、 該專用磁盤厚度約為5-6cm，占用的空間小，不影響注塑機的開模空間。
五、 操作簡便，任何非專業人員只需經過1分鐘左右的培訓即可熟練操作。

The rapid mold-change system has the following advantages.
I. Simple installation, Injection molding machine doesn’t need any change when installation process.  .
II. High safety efficiency:  Strong magnetic force, keep magnetic when power outage. Magnetic force will not disappear or decline under the influences of time and temperature.  
III. Rapid mold-change system can greatly improve mold-change efficiency and reduce mold-change time.
IV. The thickness of the special disk is about 5-6cm, which occupies small space and will not affect mold opening space of the injection molding machine;
V. Convenient operation: Any non-professional personnel can operate expertly after training for about 1 minute.