| 產品型號： | uv-int 160 |
| | |
| | 一、產品簡介： |
| | |
| | 儀器適用： 測量UV紫外光強度，能量，溫度， 儀器裝有軟件，具有記憶功能，能聯電腦使用。 |
| | |
| | 二.技術資料 |
| | 德國UV-int160 |
| | UV能量計 |
| | 型 號：德國UV-int160 |
| | 儀器適用： 測量UV紫外光強度，能量，溫度， |
| | 儀器裝有軟件，具有記憶功能，能聯電腦使用。 |
| | 波長範圍： UV 250 - 410 nm |
| | 輸入功率： 0 -- 5,000 mW/ |
| | 測量範圍： 0-- 2,000 mW/cm2 |
| | 顯示範圍： 0 -- 36,000 mJ/cm2 |
| | 能量顯示： 2×16位LCD液晶 |
| | 測量精度： ± 5 % |
| | 測量溫度： 0--115°C |
| | 取樣速度： 0.01 秒(100次/秒) |
| | 記錄週期： 120秒. |
| | 儀器電源： 2 ×3.6 V 長效鋰電池 |
| | 儀器功耗： 20 uA |
| | 電池壽命： 2,000 次 |
| | 儀器尺寸： 120×70×13 mm |
| | 儀器重量： 200 g |
| | 工作極限： 置於110°C 測量環境中≯10秒 |
| | 儀器功能： |
| | 1.儀器裝有UV傳感器與微處理器； |
| | 2.裝有測量記憶軟件，能將測量到的光強度、能量、溫度值輸入到電腦里； |
| | 3.具能自動開機，自動關機功能； |
| | 4.置於儀器背後的傳感器上覆有保護材料 |
| | |
| | UV Integrator 160 |
| | + UV-intensity mW/cm2 |
| | + UV-dose mJ/cm2 |
| | + selectable “triggered mode”* |
| | + LCD display |
| | + temperature °C/°F |
| | + SD Memory Card Slot |
| | + graphic chart on PC |
| | + re-chargeable accu cells with charger |
| | The UV Integrator 160 is a small, self-contained, high quality UV measuring instrument. It is designed to |
| | measure and display peak UV intensity in mW/cm2, UV dosage in mJ/cm2 and temperature in the UV |
| | curing process. |
| | In the standard version it is equipped with one UV sensor and one temperature sensor for the measuring |
| | of: |
| | Full UV 250 – 410 nm |
| | Temp 32 to 230° F / 0 to 110° C |
| | With this total UV band peak energy and dose measuring, most of the measuring requirements of UV |
| | curing applications can be covered. |
| | Due to its UV sensor and the integrated microprocessor the UV Integrator 160 can measure and display |
| | the peak UV-intensity of the total UV spectrum (mW/cm2). |
| | Additionally, this UV-measuring instrument is calculating the UV-dosage (mJ/cm2) of the UV energy |
| | supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total |
| | Integral of UV-dosage over the full UV spectral bands. |
| | An extra sensor is measuring temperatures from 32 to 230° F / 0 to 115° C. |
| | The sensors are on the back of the unit which also serves as a heat shield. After completion of the |
| | measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display. |
| | *This Integrator features a selectable „triggered mode“, i.e. the 60 sec recording cycle starts within a 120 |
| | second readiness phase not before the incident UV-intensity exceeds 2 mW/cm². |
| | This microprocessor integrator is additionally equipped with an SD Memory Card Slot. All measuring data |
| | are stored on an SD-Memory Card and can be downloaded to a computer. The special evaluation |
| | software allows to show, edit and store a history of the measuring results of the entire measuring cycle as |
| | graphic and numeric charts (mW/cm2),(mJ cm2) and (°C/°F). |
| | A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy |
| | saving and extension of the battery service life. |
| | The UV Integrator 160 is available in five different measuring ranges: |
| | (Please state upon order) |
| | Item 48.2.1 UV Integrator 160, Type 1 Diazo 350 – 460 nm + Temp |
| | Item 48.2.2 UV Integrator 160, Type 2 UV-A 315 – 410 nm + Temp |
| | Item 48.2.3 UV Integrator 160, Type 3 UV 250 – 410 nm + Temp |
| | Item 48.2.4 UV Integrator 160, Type 4 UV-B 280 – 315 nm + Temp |
| | Item 48.2.5 UV Integrator 160, Type 5 UV-C 230 – 280 nm + Temp |
| | Item 48.2.6 UV Integrator 160, Type 6 UV-V 395 – 445 nm + Temp |
| | |
| | |
| | |
| | |
| | |
| | |
