濟南華諾機器專業生產供應鋁門窗加工設備，數控雙頭切割鋸，斷橋鋁門窗加工設備，鋁門窗精密切割鋸，組角機，端面銑床，角碼切割鋸，雙頭切割鋸，壓力機，雙頭仿形銑，塑鋼門窗設備等，歡迎洽談。
聯繫人：韓麗  聯繫：188.0541.8309 QQ：1657.1918.62

鋁門窗組角機LMB-120 
Single Point Crimping Machine
鋁門窗單頭組角機主要用於角碼結構的平開門窗 45 °接縫的擠壓聯結。 
組角前，在兩個被聯結的型材腔內放一公用角碼，定位夾緊后，兩個液壓驅動的沖頭強力沖向角碼的凹槽處，使型材外壁產生永久性的冷變形。將兩型材接縫擠壓，使聯結具有螺釘或其它聯接方法所不具有的高強度、高效率、高精度。 
The machine is mainly used for extrusion and connection of 45 ° seam casement window
with angle joint structure. 
Before operating, place a cornerbrace in cavities of two profiles to be connected. After locating
and clamping,the two hydraulic driven punching blocks punch towards the flute of cornerbrace,
making the outer wall of the profile permanently colddeformed. Extrude the seam of two profiles
and make strength, efficiency and precision of the connection higher than using any other means
for connection.
 
輸入電源 Power supply 380V 50Hz  
油泵電機 Oil pump motor 1.5kw 1400r/min 
耗氣量 Air consumption  50L /min 
油路系統壓力 Oil circuit system pressure 16Mpa 
沖壓力 Impact pressure 44KN 
沖頭調整行程 Impact head adjustment 25mm 
沖頭沖鉚行程 Impact head stroke 45mm 
沖頭高度調整範圍 Impact head height adjustment 80mm 
定位塊行程量 Locating block stroke 70mm 
定位塊行程調整範圍 Impact block stroke  80mm 
氣路系統壓力 Locating block stroke adjustment  0.4~0.6(Mpa)  
型材最大高度 Max height  120mm  
機床外型尺寸 Overall dimension  830x1000x1200(mm)