1.The main frame is made of nine folds structure and welded by special3-Tees. fine appearance and firmed configuration.
2.The distance between the lower rim of the cabinet and the ground is about 25MM;There are round holes in each 25MM distance on the upper board.which can not only strengthen the stress of the door but also can install other accessories.
3.The installation panel takes 25MM distance as unit that can be moved fore-and-aft and adjust the depth.
4.There areround holes and square holes in each 25MM distance on the nine folds structure frame which can make the inner installation and fixed machine easily.
5.The top cover,side panel,rear panel and bottom panel are all fixed by screws which is easy for installing and uninstalling; the installation in cabinet inside is more convenience.
6.The cabinet be processed by professional Automatic polyurethane gasket filling machine and using 3 points lock which can make sure the cabinet be sealed well.IP55.
7.The three part bottom panels for input line hole are replaced. which can move freely. These can make the cable entry easily.
8.It is easy to install and uninstall the base (optional accessories)
9.Optional accessories.
10.We can manufacture the cabinet according to the customer special requirements also.

Surface Treatment：degreasing,phosphating,powder coating.
Material:
Cold rolled steel or stainless steel
Body color:RAL 7032
Installing panel:RAL1003
Base:RAL7022