Application:

Mainly used for the crushing of medium or lower-hardness mines and rocks with medium or lower rigidity in mine selection, chemicals, cement and building materials industrial production.

 

Working principle:

A roll crusher crushes using compression, with two rolls rotating about a shaft, towards the gap between the rolls. The gap between the rolls is set to the size of product desired, with the realization that the largest feed particle can only be 4 times the gap dimension. The particles are drawn into the gap between the rolls by their rotating motion and a friction angle formed between the rolls and the particle, called the nip angle. The two rolls force the particle between their rotating surface into the ever smaller gap area, and it fractures from the compressive forces presented by the rotating rolls.

 

Advantages:

Wear resistant liners that may be replaced with rolls in situ

Compact size relative to capacity

Reduced maintenance

Permits foreign, un-crushable material to pass

Adjustable product size

Build up of sticky material minimized

Negligible moisture loss due to heat generation or wind

Production of fines minimized

 

Features:

Grooved, toothed roll faces

Replaceable, cast alloy steel drum liners

Shaft mounted helical bevel gear motors

One roll spring loaded

Adjustable gap

Range of standard single and double roll toothed crushers

Adjustable scrapers

 

Detail Technical Parameters of Our Double Toothed Roll Crusher are in our Website 3w.cncrusher.com

 

Technical Parameters: