Tianjin Xu Di "brand pipe mill:

Wearing the machine main technical parameters:

The main frame section four full-length 26.2m, 1, 1 meters wide, 0.65 meters high in the channel 12, adjustable # ( GB )

Car 3, reducer model for 1 XW7, the ratio 1: 87, the motor power, the 5.5kw1 table, reducer cone ( double cone ), both ends of the chain wheel shaft.

Dolly: long x wide 0.6m x 1.0m, ( with a stroke switch control ), 1

Chain 6 full-length 56m ( double pitch )

Power control box 1

The machine is not fixed, through artificial adjustment, can be completed in 10.5 meters - 12 meters between different lengths of pipe in pipe mission maximum working range than 1220 steel.

Wearing the machine of large equipment - prefabricated directly buried insulating pipe ( tube ); directly buried insulation pipe steel pipe by the conveying medium, high density polyethylene jacket tube, and the tube and the outer tube is filled between the rigid polyurethane foam layer and temperature are tightly integrated into prefabricated directly buried insulating pipe than the traditional types of pipe insulation has the advantage of very prominent: 1, good insulation properties, heat loss was only the traditional pipe 25%, the long-term operation can save a lot of energy, reduce energy costs.

In 2, has a strong waterproof and corrosion resistant ability, does not need to be attached to pipe ditch, can be directly embedded into the ground or water, construction convenient, low comprehensive cost. In 3, under the condition of low temperature and has good corrosion resistance and impact resistance, can be directly buried underground soil. In 4, the service life of up to 30-50, proper installation and use can make the network very low repair cost. 5, can set the alarm system, automatic detection of pipeline leakage fault, fault location and automatically alarm indicator.

Xu Di company sold equipment for one year warranty, life-long repair, is responsible for site installation and commissioning, training of technical staff.