Allgong and  Argiope brand plastic granule toughening agent purpose of products:

① A-661is mainly used in：PP, PE, , POM, PVC, PET,PETG, etc. ② A-662 is mainly used in ABS, fire protection ABS , HIPS, GPPS, PMMA, SAN ,PC, PA, PC+ABS, PC+PBT and all sorts of fiber plastics. ⑤ A-666 fits for any plastic. ⑥ A-668, common type, is the leader of granule series. Tryout is necessary for using in other raw materials.

Allgong and  Argiope brand plastic granule toughening agent purpose Usage and dosage：

1. Ultra-low cost, Dosage is0.6- 1%，namely add 8-10g toughening agent to 1KG raw material. Be sure that 25KG plastic sample is used and mixed in blender for 5-8 minutes. (Mere several KG is not accurate enough).

2. Simple usage: Toughening agent is added in the process of blending materials. Toughening agent is blended with plastic scrap, regrind plastics and raw materials for 5-8 minutes. When the material has been uniformly blended, the mixture material can be heated for extrusion and blow or injection molding.

3. In order to test the effect of A-661/662/666/668 Allgong and  Argiope brand plastic toughening agent, please carry out it after that the extrusion and injection or blow molding have be finished for 24 hours. That will make the effect more obvious. Please compare it with plastics of same material and try your best to use plane product without hole.

4. Package, stockage and durability: Paper bag or carton packing net weight is 20KG/piece. Keep away from insolation, moisture and contamination. Product durability is 3 years.

Caution: Detergent should be used to clean this product. If this product splashes into eyes, please flush the eyes with a great amount of water and go to see the doctor.