Tongda pump company is one of the most professional pump manufacturer with more than 20 years experience.

Vertical slurry pumps is taken to pump the slurry from the tank. The pump head is placed below the liquid level, but not the whole pump into the water.If the pump motor and other parts also are put into the slurry, then the pump is called submersible slurry pumps.

Flowing parts: This vertical slurry pump is immersed into the liquid to work. The pump case is wear-resistant metal and the impeller is produce by wear-resistant metal or rubber etc. Bearing with grease lubrication: According to the height of liquid slurry tank, we can choose different lengths of suction pipe or drive shaft. Seal: No shaft seal and seal water,even in condition of insufficient inhalation,it also can work normally. Driving: V shape belt driving and flexible couple driving.

Meaning of Serial No.

For example: 40ZJLA21
40: outlet diameter (mm)
ZJL: vertical slurry pump
A: No. of impeller's vanes (A for 5pcs, B for 4pcs, C for 3pcs, D for 2pcs, E for 1pc, F for 6pcs, G for 7pcs)
21: Diameter of impeller (cm)