SILOS :
- Commercial Type (Flat Bottom) Steel Silos with capacity from 100 tone to 10.000 tone
- Conical Type (Hopper Bottom) Steel Silos with capacity from 10 tone to 1.000 tone
Silos includes level sensors,aeration system with centrifugal fan,temperature control system and sweep auger as an option.
CARRYING EQUIPMENTS :
- Bucket Elevator with capacity from 1 tone/hour to 400 tone/hour
- Chain Conveyor with capacity from 1 tone/hour to 400 tone/hour
- Screw Conveyor with capacity from 1 tone/hour to 200 tone/hour
- Elevator Towers
- Electrical and Manuel controlled Slide gates
- Distrubutors with 1 in 2/3/4/5/6 out
- Catwalks
- Spout Pipes
MACHINES :
- Drying Machines ( Tower Type and Horizontal Type ) with capacity from 5 tone/hour to 50 tone/hour
- Mill Machines with capacity from 5 tone/hour to 50 tone/hour
- Pellet Machines with capacity from 5 tone/hour to 50 tone/hour

Hopper-bottom Steel Silos Hopper bottomed  silos are automatic-flow unloaded with quality cleaning system. They are widely used for storage of seeds, flour, feed, cement and chemistry, which need to be cleaned continually. With solid basic structure the conical- bottom has very strong strength .There are three kinds of angles ,40 degree,45 degree and 60 degree, among which the 60 degree conical-bottom is usually used to store larger pellet and powdered materials of high viscosity
Features: It is famous for the automatic-flow unloading way, because it can save resources and costs

This type is free-flow discharging with good cleaning system without residue. It's widely used in storaging seed, flour, feed, breed, cement and chemical, which need to be cleaned frequently. With solid structure the conical- bottom has large strength. There are three kind of angles of 40, 45and 60, among which the angle of 60 conical-bottom is usually be used to store bigger pelletled and powdered materials of high viscosity .
Features: It is famous for the free-flow discharging and free of humanpower, so it can save resources and cost.

Hopper-bottom silos:

                                  * steel silos with 45 Deg.Bottom Cone

                                    Volume:7.2m3-1855m3

                                    Capacity:5.4t-1428t

                                    Diameter:1.8m-11m

                                  * steel silos with 55 Deg.Bottom Cone

                                    Volume:7.5m3-981m3

                                    Capacity:5.8t-755t

                                    Diameter:1.8m-8.2m

                                   * steel silos with 60 Deg.Bottom Cone

                                     Volume:8.4m3-701m3

                                     Capacity:6.3t-528t

                                     Diameter:1.8m-7.334m

Some advantages of our product:

1. Lower basic cost with lightweight, low request for foundation, low consumption of steel.

2. High degree of standardization. We can produce the standard components which can be installed on-the-spot.

3. Simple, easy and efficient to install within a short amount of time due to superior component design which are connected by standard bolts.

4. Easy to understand . The bolted silo is equipped with relevant accessories, such as: conveyor, ventilation, drying and monitoring devices, etc. to ensure the quality and safety of the material stored in the silo.

5. Easy to maintain. As the parts of the silo are connected by standard bolts, so it is easy to remove or repair it.

6. Low cost and long tenure of use. The cost of bolted silo is just 35%-50% of the cement silo with the same specification; and its life span can reach 30 years.