EN 13501-1 fire test to building material – classification

 

Firetc fire test center will provide European Standard EN 13501-1 Fire test to Building Material.

  

EN13501-1:2007: Fire classification of construction products and building elements-Part1: Classification using data from reaction to fire tests

EN 13501-1: Fire Test to Building Material-Scope

With the lucubrate and development in fire science and fire protection, right from the combustion characteristics of flame spread, extend to include the rate of heat release, heat release, toxicity of smoke density and combustion result and other parameters. The classes is EN 13501-1 actively consider the above parameters, therefore more scientific. EN 13501-1 also provides a number of test methods not only consider the actual fire scene, but also consider the end use of the material, which is more practical representation.

EN 13501-1: Fire Test to Building Material-Product

> Construction products, excluding floorings and linear pipe thermal insulation products

> Floorings

> Linear pipe thermal insulation products

 

EN 13501-1: Fire Test to Building Material-Products

> Insulated material(mineral wool board，glass wool，plastic parts, etc)

> Textile(curtain, portiere, etc)

> Floorings（Bamboo flooring, wood flooring, plastic flooring, carpet, rubber flooring, etc）

> Pipeline(Air condition hose, etc)

EN 13501-1: Fire Test to Building Material-Reference Standard

> EN 13823, Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item

> EN ISO 1182, Reaction to fire tests for building products. Non-combustibility test (ISO 1182:2002)

> EN ISO 1716, Reaction to fire tests for building products. Determination of the heat of combustion (ISO 1716:2002)

> EN ISO 9239-1, Reaction to fire tests for floorings. Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002)

> EN ISO 11925-2, Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame . Part 2: Single-flame source test (ISO 11925-2:2002)

EN 13501-1: Fire Test to Building Material-Similar Standard

> EN ISO 11925-2: Reaction to fire tests-Ignitability of building products subjected to direct impingement of flame -Part 2: Single-flame source test

> EN 13501-1: Fire classification of construction products and building elements- Part1: Classification using data from reaction to fire tests

> NF P 92 - 501: Safety against fire - Building materials - Reaction to fire tests - Radiation test used for rigid materials. or for materials on rigid substrates (flooring and finishes) of all thicknesses. and for flexible materials thicker that 5 mm

> NF P 92 - 503: Safety against fire - Building material--Reaction to fire tests. Electrical burner test used for flexible materials

> BS 476: Fire tests on building materials and structures

> GB 8624: Classification for burning behavior of building materials and products

> GB 20286: Requirements and mark on burning behavior of fire retarding products and subassemblies in public place