UPPER FEED TYPE WEIGHING FEEDER

Product Description

    Weighing feeder is designed for the feeding of various bulk materials. It is used for dynamic weighing, accumulating and flow control in the process of feeding. It is widely used in chemical, metallurgy, building materials, food and other industries. Bulk material weighing feed. Over the years due to weighing feeder difficult to carry out on-line real-time calibration, resulting in low precision measurement process, a serious impact on the accuracy of the feed ratio to the production losses.

    Saimo weighing feeder in light load, medium load, heavy load three different forms, weighing flow from 50 kg per hour to 1,200 tons per hour, belt width from 300 mm to 2000 mm, length from 1 meter to Tens of meters, the structure of sub-open, semi-enclosed and fully enclosed a variety of structures, adapted to different sites to meet the needs of various users.

    Saimo feeder and electrical control, together with the computer can be composed of Saimo batching control system. The system has data acquisition, control, alarm, graphics and data display and other functions. According to set requirements to complete the control of the ratio of materials and production process into a variety of data management.

    Calibrating technology of static and dynamic code materials  

 

    The technology is based on the weighing feeder as a whole by the four load cell support, through the upper feeder to the form of pre-feeder, using the static weight calibration as the basis for weighing the value of the material with its dynamic weighing value of its range calibration correction Coefficient, to achieve physical calibration.

 

LOW CAPACITY WEIGH BELT FEEDER SYSTEM, MODEL F51

Product Description

The Saimo F51 Weigh Belt Feeder System is specially designed for light material handling, mainly in the food and chemical industry at low feed rates with precision and high sensitivity. 

The system is ideal for applications require capacity between 50kg/h to 10,000kg/h or belt loading from 2kg/m to 20kg/m.

Options:

• Carbon steel or stainless steel construction
• Full-sealed enclosure with head hood and tail discharge
• Drive motor style: chain transmission or shaft mount
• Flow/no-flow detector, run off switches, safety pull switch and pl ed-chute detector

Features

• Capacity range: 50kg to 10,000kg per hour
• Accuracy: ±0.25-1.0%, on approved applications
• Belt widths: 300mm, 400mm, 500mm, 650mm
• Endless polyurethane belt or other applicable belt
• Weighbridge directly supported by dual load cells
• Digital speed sensor, directly coupled to the conveyor tail pulley

Applications

For light material handling, mainly in the food and chemical industry at low feed rates with precision and high sensitivity.

Technical Specifications

• Capacity range: 50kg to 10,000kg per hour
• Accuracy: ±0.25-1.0%, on approved applications
• Belt widths: 300mm, 400mm, 500mm, 650mm
• Belt loading from 2kg/m to 20kg/m

 

MID RANGE WEIGH BELT FEEDER SYSTEM, MODEL F52

Product Description

The Saimo F52 Mid Range Weigh Belt Feeder System offers accurate and reliable weighing solution for a wide of range of applications. 

It is ideal for applications where the flow rate is between 1t/h and 450t/h and where belt loadings of 15kg to 260kg are required.

Options:

• Open, semi closed or closed housing
• Fully sealed enclosure with head hood and tail discharge chute
• Self cleaning chain scraper conveyor
• Drive motor style: coupler, chain transmission or shaft mount
• Flow/no-flow detector, run off switches, safety pull switch and pl ed chute detector

Features

• Capacity range: 1t/h to 450t/h
• Accurate to within ±0.5%, on approved applications
• Belt width: 500mm, 650mm, 800mm, 1000mm, 1200mm
• Endless corrugated edged rubber belt or other applicable belt
• Weighbridge directly supported by dual load cells
• Digital speed sensor, with direct coupling to the conveyor tail pulley

Applications

Offering accurate and reliable weighing solution for a wide of range of applications.

Technical Specifications

• Capacity range: 1t/h to 450t/h
• Accurate to within ±0.5%, on approved applications
• Belt width: 500mm, 650mm, 800mm, 1000mm, 1200mm