6 CH WASP V3 3D Aerobatic RC Helicopter RTF w/ Gyro + Servo + Brushless + Li-Po

Model:	HWH03-7
Brand:	6 CH WASP V3 3D Aerobatic RC Helicopter
Origin:	-
Category:	Toys / Model Toys
Label:	3D Aerobatic RC Heli , 6 CH , SKY706 2.4GHz 7CH R
Price:	-
Min. Order:	6 pc

Inquire Now

Product Description

Wasp V3 6ch helicopter;15A brushless speed controller; head locked gyro; four servos; 4500kv
brushless motor; SKY706 2.4GHz 7CH TX; SKY706 2.4GHz 7CH RX; 7.4V 900mah LI-PO battery and charger;

Feature:

            7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control
   (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set High Performace 4500KV
    Outrunner Brushless Motor used as the main drive and makes the flight much stable and better
     performace

Can fly in skyway, backward, and 3D aerobatic

Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing

Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic
responds

The autorotation landing system, made of high quality one-way bearing, maximally protects your
helicopter from damage

Hard, Light weight foam Blades

Brand new design for the structure

Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of
flying

Tail rotor driven by belt provide stable flight and low noise

NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter

No need to worry about burning tail motors

Outer placed Head Lock Gyro

7.4V 900mAh high capacitance Li-Po battery provide enough power for any aerobatic flight

With length-adjustable servo push-rod, precision sub trim can be easily set

Separate main shaft and main gear reduce repair time and noise

Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the
load of whole helicopter

Easy to fly and more stable lifting

Provide excellent performance outdoor and indoor

Tail blade adopt flameout landing system

Newly Designed Rotor Head gives better control

Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw
and easy to install

Extreme smooth control and stable flight

Precise controlling and hovering

Digital Proportional Motor Speed Control

Suitable for Indoor/Outdoor/Backyard/Stadium

Using the Ultra tough Aluminum Alloy materials, the Helicopter does have very strong structure. In
addition, the main rotor blades are using top quality material , which is extremely light and not easily break

Approximately 15 minutes flight time on each charge - 7Optional Li- poly battery will help to achieve
better performance and longer flight time.

Best choice for Beginner - Advanced hobbyist

All spare parts and accessories are availableComplete Kit, Ready to Fly (Everything is included and
100% assembled -- 8 AA batteries for the transmitter not included)

Specification:

Main Rotor Diameter: 475mm

Length: 450mm

Flying Weight: 293g (Battery included)

Driven system: Skyartec 4500KV brushless motor

Gyro: Skyartec Head Lock

Servo: 3X Skyartec 9g,1X skyartec 5g

ESC: Skyartec 15A

Battery: Skyartec 7.4V 900mAh Lithium Li-Po

Control system: SKY706 2.4GHz 7CH Transmitter and SKY706 2.4GHz 7CH Receiver

Radio Control Range: 2500 feet (762m)