Type 316L has the same composition as Type 316 except the carbon content is held below 0.03%. Not unexpectedly, its general corrosion resistance and other properties closely correspond to those of Type 316. However, it does provide immunity to intergranular attack in the as-welded condition or with short periods of exposure in the temperature range of 800 deg. - 1500 deg.F. The use of 316L is recommended when exposure in the carbide precipitation range is unavoidable and where annealing after welding is not practical. However, prolonged exposure in this range may embrittle the material and make it susceptible to intergranular attack.
• The maximum temperature for scaling resistance in continuous service is about 1650 deg. F. and 1500 deg.F. for intermittent service.

Bolt: M6-M64 (hexagonal, flange)
  Nut: M3-M64 (hexagonal, flange)
  Threaded Rod:4-3000mm (all thread, double end thread)

Material:
1.Special stainless steel
904L, 1.4539, 317l, 1.4439, 254SMO, 1.4547, 654SMO, 1.4652, AL-6XN, 1.4529, Duplex S.S. Zeron 100, F55, 2507, 2205, F51, 1.4462,A240, S32760, 1.4410,hastelloy C22, Hastelloy B2 B3,Inconel625, Inconel601, Inconel718, Inconel825, Inconel925, Hastelloy X,
Inconel600, Nimonic80A, GH3030,GH3044,GH2132,Inconloy A286, Monel400, MonelK500, Alloy59, 316Ti ,etc
2.Ordinary stainless steel
SUS304, 302, 316, 316l, 310 etc.
Standards: GB ,ANSI/AMSE, DIN, JIS and BS,UNI etc

Packing : Plywood case or wooden box