Launch KWB-503 Wheel Balancer (China Manufacturer) - Auto Maintenance - Car Accessories Products

Launch KWB-503 Wheel Balancer

Model:	Launch KWB-503
Brand:	-
Origin:	Made In China
Category:	Transportation / Car Accessories / Auto Maintenance
Label:	Launch KWB-503 , auto diagnostic tool , auto maitenance
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

Product Name : Launch KWB-503 Wheel Balancer;

Introduction:
KWB-503 Wheel Balancer display board To save the cost and improve the reliability, then solve the instability of the display, so simplify the elements and change the structures.

Feature:
*3D Sensor Arms
*LED Display
*40Wheel Diameter
*Cars And Motorcycles

Specification:
*Diameter of shaft: 1.57(40mm)
*Balancing aaccuracy: 0.05oz(1g)
*Wheel data acquisition: manual and automatic
*Rim Width: 1.5~20(38--508mm)
*Wheel width with guard : 21(530mm)
*Measurable rim diameter: 8~26(203-660mm)
*maximum wheel diameter with guard: 40(1000mm)
*Maximum wheel weight: 154Ibs.(70kg)
*Power supply:230V/110V,1Ph, 50Hz/60Hz
*Cycle time:7seconds(average 13~16 wheel)

Function Improvement

Item

	Notes on Improvement	Update Date
KWB-503 wheel balancer display board and mianboard improvement	KWB-503 display board To save the cost and improve the reliability, then solve the instability of the display, so simplify the elements and change the structures. KWB-503 main board Mainly change one connector and add the interface of the laser pen. Remarks: The main boards of KWB-501/502,KWB-503,KWB-503+ and KWB-530 will all be changed to this one since their main boards were the same.	2012-1-7
KWB-503 customer upgrading programme releasing	This is the 2nd time of KWB-503 upgrading programme releasing. This releasing is Only for the market Dep. and after service engineer upgraing the KWB-503 programme in the customer end. The function of KWB-503 is updated as follows: 1. No Err will be indicated when the hood is put down too quickly when the hood is effective. 2.It defaults non-accuracy mode when the machine starts; the values of the wheel diameter and width in the non-accuracy mode and inch unit will be rounded by 0.5 inch to meet the user operation habit. 3. The special Alus mode under the ALU mode is added and the Alus mode is the user-defined measuring mode which supports the user flexibly operate the balancer under the ALU mode according to the real shapes of the wheel and rim.	2011-12-23
wheel balancer KWB-503 main board burning programme(combination version) releasing	The function of KWB-503 is updated as follows: 1.No Err will be indicated when the hood is put down too quickly when the hood is effective. 2. It defaults non-accuracy mode when the machine starts; the values of the wheel diameter and width in the non-accuracy mode and inch unit will be rounded by 0.5 inch to meet the user operation habit. 3. The special Alus mode under the ALU mode is added and the Alus mode is the user-defined measuring mode which supports the user flexibly operate the balancer under the ALU mode according to the real shapes of the wheel and rim.	2011-12-20
KWB-503 change notice	before: 1. there is no filter. 2. 3D arm is too long. now: 1. add the filter 2. change the length of 3D arm.	2011-10-18
KWB-503 new software	Released the new software	2011-4-6

Target customer:

Car manufacturer workshops, Independent Workshop or tire service shop with a high amount of wheel alignments where professional, reliable and affordable equipment is needed.

After Sale Service :
Three years product quality warranty
1) Free update during three years;

2) Free repair and maintenance service in one year;

3) Free technical support by internet or via phone.

If you have any interests in it, pls contact us directly.