Anole hot runner new type large gate nozzles are with large flow and excellent color change capability.It can process the front end to meet requirments of the cavity and gate.It is applicable for crystalline and low flow plastic parts,with good interchangeability .1.new type large gate is suitable for the gate on the incline side of plastic products and smaller waste than normal gate nozzle 2. new type large gate is applicable for low-flow plastic 3.new type large gate can change color directly 4.new type large gate bush and nozzle are structured separately,easy to exchange. 5. new type large gate mould need not heat treatment,while heat treated bush with longer service life.6.new type large gate use standardized bush,easy to exchange.7.new type large gate bush is close to nozzle heating coil,which is good for thermal conductivity8.new type large gate is suitable for big plastic parts like bumper,instrument panel moul and so on.