Specifications for PC hollow sheet
1)Thickness:3.5mm，3.7mm，3.8mm，4mm，5mm，5.5mm，6mm，7mm，7.5mm，8mm，8.9mm，9mm，9.2mm，10mm.
2)Max width: 2100mm.
3)Length: NO limited.
4) Standard size (width x length x thickness):
a) 2100×5800×4mm
b) 2100×5800×6mm
c) 2100×5800×8mm
d) 2100×5800×10mm
5)Non-standard sizes and special colors are available according to customers' requests

Characteristics:
Light transmission Maximum 86%
Weight Light, only 1/15 of glass at the same thickness
Impact resistance 10mm twin-wall panel can stand 200J impact energy
Cold-bent The safety radius of curvature is over 175 times of its thickness.
Sound insulation The internal hollow structure can reduce noise greatly.
Dew-proof The board can't be dewed if the indoor relative humidity is below 80%.
Energy-saving Low heat transfer coefficient K-value and good thermal insulation
UV-protection The board coated with high-density ultraviolet absorbent
Flame retardancy Flame retardancy Class B1 in accord with GB8624-1997

Applications:
1) Roofing for swimming pool, shopping malls, commercial streets.
2) Sunshade for stadiums and bus stops, gazebo, open-air carport.
3) Lighting canopy for corridors, passages and subway entries.
4) Flashing for bank ATMs, telephone box, gateways, garages.
5) Sound and heat insulation wall for expressways and houses.
6) Heat preservation material for agricultural greenhouse, flower greenhouse.
7) Soundproof material for partitions.
8) Unbreakable material for glazing windows, roof glazing.

Zhejiang Aoci Decoration Materials Co., Ltd.
WhatsApp (Mobile):+86-15968691750            Office:+86-576-88124888
For faster communication                              Skype:vastsea-jaime
Email:sales1@zjaoci.com                                www.aocizscl.com