LEDTube Series LED daylight lamp series

Model Model material Material specification Spcifications (mm) LED number Voltage ( V ) Number voltage power power (W ) = Contrast brightness of fluorescent lamp ( W )

ZC-T8-600 PC transparent \ diffusion + aluminum L600 * AC85-265V = 8 20W < 26120

ZC-T8-600 PC transparent \ diffusion + aluminum L600 * AC85-265V = 10 30W < 26144

ZC-T8-900 PC transparent \ diffusion + aluminum L900 * AC85-265V = 12 35W < 26168

ZC-T8-1200 PC transparent \ diffusion + aluminum L1200 * AC85-265V = 14 40W < 26216

ZC-T8-1200 PC transparent \ diffusion + aluminum L1200 * AC85-265V = 18 50W < 26288

ZC-T8-1200 PC transparent \ diffusion + aluminum L1200 * AC85-265V = 22 60W < 26336

ZC-T8-1500 PC transparent \ diffusion + aluminum L1200 * AC85-265V = 25 80W < 26360

ZC-T5-600 PC transparent \ diffusion + aluminum L600 * AC85-265V = 6 20W < 1688

ZC-T5-900 PC transparent \ diffusion + aluminum L900 * AC85-265V = 10 30W < 16168

ZC-T5-1200 PC transparent \ diffusion + aluminum L1200 * AC85-265V = 14 40W < 16216

You you you you you you you Technical Technical gauge lattice parameter you number

Model you Number model ZC-T8-1200

Light you Source you W power 18

Colour color Warm White, White, Cool White warm white, is white, cool white

CCT color 2800K-9000K

Input you Voltage input voltage AC85-265V

Line you Frequency power frequency 50-60 you Hz

Lumen Output Transparent Lm transparent 1900 you

Luminous flux of 1676 Lm Dirrusion Scrub

LumenDepreciation rated attenuation < 10% you within you 50000 you hrs

Luminous you Efficacy luminous efficiency 110 Lm / W ( transparent ) you you you you you you you you 87Lm / W ( diffusion )

The Installation installation instructions

The installation must be examined before the old fluorescent lamp bracket is in what way to drive the light tube, is electronic driving mode or inductance ( coil ) drive, if electronic driving mode, will be original and electronic ballasts connected power apart, and the lamp and electronic ballast connecting wire cut, if ( coil inductance ) ballast, without changing the other lines, the light tube and starter removed, replaced the LED lamp can be normal use.

The rotary lamp with traditional fluorescent lamp.

The turn off the power switch, open bracket cover, remove the electronic ballast and starter.

The commercial power input line AC zero, two received two caps, and good insulation measures ( wiring head position wrapped electrical insulating tape ); note that need electrician safe operation knowledge, such as the user does not have the electrician safe operation knowledge, should be a professional electrician operation. Check wiring correct installation back bracket cover ( locking screws ).

Will you buy the same specification to the length of the LED daylight lamp mount bracket.

" The close switch, open you to replace the fluorescent lamp switch, can be lighted lamp.

"

Packing product packaging

Outline dimensions QTY / Carton GW / PCS Carton Measure

D26 * L600mm 25, 235g 670 * 200 * 200mm

D26 * L900mm 25, 350g 970 * 200 * 200mm

D26 * L1200mm 25, 445g 1260 * 200 * 200mm

D26 * L1500mm 25, 625g 1560 * 200 * 200mm

Customer service after sale service

Should the needs of the market, can be customized according to the customer. I Si Riguang lamp warranty for two years, during the non-artificial damage free maintenance and replacement. We sold is not only the product itself, is more of a responsibility to sell products.