General Description:
1.       Switching error: 4% RH (±3% tolerance)
2.       Relative humidity range: 35%~95%
3.       Allow wind speed: 15 m/sec
4.       Contact type: Changeover contact
5.       Contact resistance: ＜10m ohm
6.       Service life: ＞50000 cycles
7.       Mix. Switching capacky: 20V AC/DC 100 mA
8.       Max. Switching capacky: 25 VAC,5 A   20WDC
9.       Connection: 3-pole terminal for 2.5 mm², clamping torque 0.5Nm max.: rigid wire 2.5 mm², stranded wire (with wire end ferrule) 1.5 mm²
10.   Installation: 35 mm DIN Installation guide
11.   Casing: UL94 V-0 Plastic, light gray
12.   Dimensions: 67*50*38mm
13.   Weight: about 60g
14.   Fitting position: variable
15.   Operating/Storage temperature: 0~+60℃(+32~+140℉)/-20~+80℃(-4~+176℉)16.   Protection type: IP20
The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosure with electric/electronic components is effectively prevented.

1. Adjustable relative humidity
2. Change-over contact

3. High Switching capacity

4. Easily accessible terminals

5. Clip fixing