Goodcrete DPS is a unique  water-based chemical  product  for  the  moisture  protection  of  large- scale concrete substrates against temperature and water associated  problems  such  as  thermal  cracking,  damage caused by repeated freeze and thaw cycles, chloride ion penetration, as well as alkali silica reactions.

Goodcrete DPS is the only product, which has hydrophilic and water absorption functions to prevent moisture. For its low viscosity, it can easily penetrate deep into the concrete substrates and carry on a series of reactions, so it has very good protection performance.

GoodcreteDPS provides two effective mechanisms for concrete   protection. First, it gives good exclusiveness on the construction surface and it enhances the surface tension of water and other kinds of liquid (such as jet fuels and gasoline), preventing water (liquid) from penetrating into the concrete through the capillaries of concrete. And then through the crystallization process, it already can prevent water and moisture in the capillaries of concrete. The crystals not only have hydrophilic function but also have water absorption function; therefore it has dual wet resistance effect. In wet climates or in the conditions of having moisture, Goodcrete DPS water absorption function makes the crystals expand and fill the holes so as to prevent moisture extension. At the same time, Goodcrete DPS hydrophilic function makes the crystals grow along the direction of moisture source; thereby it forms a permanent wet barrier at the wet source. In dry climates, in the desorption process, the crystals release moisture and shrink to the initial size. The expanding and shrinking functions of crystals can make the concrete breathe continuously.

Goodcrete DPS makes the concrete have reasonable dryness, which has already used Goodcrete DPS. It reduces the water and moisture associated problems at the greatest degree.

Goodcrete DPS can also seal the cracks less than 0.3mm and improve the concrete strength. Therefore, using Goodcrete DPS, it can extend the service life of the buildings and greatly reduce the maintenance cost.

Goodcrete DPS can remove the dirt and mildew from the surface of concrete, bricks and stones and effectively prevent the generation of mold and mildew in the future. When the crystals grow, they can penetrate deep into the substrate pores and expel the dirt and impurities from the surface. Therefore, Goodcrete DPS is the best product used for maintaining the historical relics & the old buildings.

Characteristics:

1)Prevents penetration of chloride ions from deicing salts.

2)Reduces damage caused by repeated freeze and thaw cycles.

3)Provides long lasting internal waterproofing and moisture blocking from positive and negative sides of construction matrix.

4)Special exclusiveness to prevent the penetration of water and dirt.

5)Resists aggressive chemicals such as acids, caustic jet fuels and gasoline.

6)Protects reinforcing steel bars against corrosion without any negative effect on existing steel protection layer.

7)Enhances the adhesion of joint sealant and road markers.

8)Reduces Alkali Silica Reactions (ASR), and eliminates silicate dusting.

9)Increases concrete hardness, compressive strength and abrasion resistance.

10)Anti- hydrostatic, construction is available in the condition of having hydrostatic.

11)Seals hair cracking and thermal cracking, and prevents concrete scaling.

12)Water-based (no solvent), non-toxic, environmentally friendly, can be used in a variety of conditions.

13)Penetrates deep and no film.

14)Crystallizes to waterproof, permanent protection.

15)Simple construction: just spray it.

16)Removes dirt and mildew, and prevents the mold generation.