3D carbon fiber vinyl film is not just a cheap imitation vinyl, it is a high quality three-dimensional textured vinyl that reflects light the same way real carbon fiber parts do. It has a self-adhesive back and will stick to pretty much any surface, but also can be removed and re-applied numerous times without losing its adhesion. 3D carbon fiber vinyl film is also water resistant and UV stable, so applying it to exterior surfaces such as a hood, spoiler, or the whole car is not an issue.

Features:

- Durable
- Scratch Resistant
- Resistant To Solvents
- Easy Cleaning & Maintenance
- Stylish
- Can Stick Anywhere

- Air bubble free

1.has a look and fell similar to carbon fiber bonnet and hard-top

2.can be applied on interior and exterior surfaces of a car (hoods,trunks, side view mirrors and so on)

3.can be applied easily on all the common car paints

4.without residual glue after remove

The film is embossed, resembling true carbon fiber, which reflects lights as expected and change the highlights of the pattern depending on the viewing angle.

Installation Tips:

• Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.
• Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinkles
• Using a soft rubber squeegee will help smooth out bubbles and wrinkles

Application: Carbon fiber modification on engine hood,empennage, surrounding surface, 
car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by 
this problem any more after the carbon fiber vinyl come out as its price is lower 
and easy to operate.

For the carbon roll, the size is wide 1.52m and long 30m for one roll.

The available color is as below:  Black